Skip to main content

JCB adds rollers and plates to compaction line-up

JCB has added to its compact equipment range with the SD580 single drum roller, the SE10-35 forward vibratory plate and the DE35-42 reversible plate. The single drum roller, which is available with or without a dedicated trailer for road towing, weighs 185kg and delivers a centrifugal force of 10kN. It is powered by a Honda GX160 petrol engine, while a GX120 motor is used to power the forward vibratory plate. The SE10-35 has a plate width of 350mm and weighs in at 73kg. The larger DE35-42 reversible plate u
January 6, 2017 Read time: 1 min
Customers can buy the roller with a purpose-built trailer
255 JCB has added to its compact equipment range with the SD580 single drum roller, the SE10-35 forward vibratory plate and the DE35-42 reversible plate. The single drum roller, which is available with or without a dedicated trailer for road towing, weighs 185kg and delivers a centrifugal force of 10kN. It is powered by a 2288 Honda GX160 petrol engine, while a GX120 motor is used to power the forward vibratory plate. The SE10-35 has a plate width of 350mm and weighs in at 73kg. The larger DE35-42 reversible plate uses a 7125 Hatz diesel engine and delivers a 35kN force across its 420mm wide plate. Maximum travel speed is 26m/min and the control handle has been designed for both left and right handed operation.

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.JCB.com www.JCB.com false http://www.jcb.com/ false false%>

For more information on companies in this article

Related Content

  • Ammann showcases its most compact finisher
    February 6, 2013
    What Ammann describes as its most compact finisher, the 3.5tonne AFT 270 being showcased at bauma has been equipped with a new gas or electric-powered ramming and vibrating screed, said to ensure top quality finishing. With an operating weight of 5.2tonnes, the AFT 270 has finishing widths of 140 to 330cm and two operating concepts: standing operation on a pedestal and an operating platform with a sliding/rotating seat and operating console. Ammann says the AFT270, like all its finishers, comes with complet
  • Ammann showcases its most compact finisher
    January 6, 2017
    What Ammann describes as its most compact finisher, the 3.5tonne AFT 270 being showcased at bauma has been equipped with a new gas or electric-powered ramming and vibrating screed, said to ensure top quality finishing. With an operating weight of 5.2tonnes, the AFT 270 has finishing widths of 140 to 330cm and two operating concepts: standing operation on a pedestal and an operating platform with a sliding/rotating seat and operating console. Ammann says the AFT270, like all its finishers, comes with complet
  • More output for less fuel from Atlas Weyhausen’s new E Series compact wheeled loaders
    January 6, 2017
    Atlas Weyhausen’s new E Series wheeled loaders will be on display at Bauma with the AR 65e, AR 75e, AR 80e and AR95e Super all on view. Using newly developed Deutz engines, the new wheeled loaders offer up to 12% more output with lower fuel consumption figures. A key design feature of the engines is that they do not contain a particle filter and therefore are easier to maintain, claims the German manufacturer. There is a new steering valve on the E Series too, allowing operators to run the machine electroni
  • More output for less fuel from Atlas Weyhausen’s new E Series compact wheeled loaders
    February 15, 2013
    Atlas Weyhausen’s new E Series wheeled loaders will be on display at Bauma with the AR 65e, AR 75e, AR 80e and AR95e Super all on view. Using newly developed Deutz engines, the new wheeled loaders offer up to 12% more output with lower fuel consumption figures. A key design feature of the engines is that they do not contain a particle filter and therefore are easier to maintain, claims the German manufacturer. There is a new steering valve on the E Series too, allowing operators to run the machine electroni