INTERMAT visitors first to see new high flow Bobcat telehandler

Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
April 18, 2012 Read time: 2 mins
The high flow version of Bobcat’s TL470 telehandler
RSS1130 Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler.

The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine.

The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds.

In addition to providing a higher flow rate, the bigger pump is also load sending while the standard unit has a simple gear pump. A 40kmh travel speed is an option with both configurations.

The high-flow machine shares Bobcat’s new cab design, which has no rear pillar on the right hand side. This provides an unobstructed view for the operator while still giving full ROPS and FOPS protection. A screen guard is an option.

www.bobcat.com

Hall: 6 Stand: G079

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Doosan unveils 14tonne wheeled excavator at INTERMAT
    January 6, 2017
    Doosan unveiled a new Stage IIIB-compliant DX140W-3 wheeled excavator on the opening day of INTERMAT. The 14-16tonne machine’s 101kW DL06K 6-cylinder common rail diesel engine is fitted with exhaust gas recirculation and a diesel particulate filter to meet the emissions regulations. Productivity has been increased by an average of 5% while a new Lifting mode boosts lifting capacity by 15%. Hydraulic flow is 4% higher, increasing swing torque by an equal amount and bucket/arm forces by 7%.
    Read More
  • Doosan unveils 14tonne wheeled excavator at INTERMAT
    April 16, 2012
    Doosan unveiled a new Stage IIIB-compliant DX140W-3 wheeled excavator on the opening day of INTERMAT. The 14-16tonne machine’s 101kW DL06K 6-cylinder common rail diesel engine is fitted with exhaust gas recirculation and a diesel particulate filter to meet the emissions regulations. Productivity has been increased by an average of 5% while a new Lifting mode boosts lifting capacity by 15%. Hydraulic flow is 4% higher, increasing swing torque by an equal amount and bucket/arm forces by 7%.
    Read More
  • Cat’s 988K delivers increased loading capability
    January 6, 2017
    Caterpillar’s seventh generation 988 wheeled loader – the 988K – is powered by a Tier 4 Final/Stage IV Cat C18 ACERT diesel engine, featuring selective catalytic reduction and delivering 362kW. The engine is said to deliver a 20% fuel efficiency benefit compared to the 988H, thanks in part to an ECO mode with on-demand throttle, auto idle and engine idle kickdown/auto resume system. The 50tonne machine moves away from its predecessor’s monoboom loader arm design in favour of a Z-bar linkage.
    Read More
  • Cat’s 988K delivers increased loading capability
    April 17, 2013
    Caterpillar’s seventh generation 988 wheeled loader – the 988K – is powered by a Tier 4 Final/Stage IV Cat C18 ACERT diesel engine, featuring selective catalytic reduction and delivering 362kW. The engine is said to deliver a 20% fuel efficiency benefit compared to the 988H, thanks in part to an ECO mode with on-demand throttle, auto idle and engine idle kickdown/auto resume system. The 50tonne machine moves away from its predecessor’s monoboom loader arm design in favour of a Z-bar linkage.
    Read More

Highlighted Content