INTERMAT visitors first to see new high flow Bobcat telehandler

Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
January 6, 2017 Read time: 2 mins
The high flow version of Bobcat’s TL470 telehandler
RSS1130 Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler.

The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine.

The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds.

In addition to providing a higher flow rate, the bigger pump is also load sending while the standard unit has a simple gear pump. A 40kmh travel speed is an option with both configurations.

The high-flow machine shares Bobcat’s new cab design, which has no rear pillar on the right hand side. This provides an unobstructed view for the operator while still giving full ROPS and FOPS protection. A screen guard is an option.

www.bobcat.com

Hall: 6 Stand: G079

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Dana shows HVT R3 at INTERMAT
    January 6, 2017
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More
  • Dana shows HVT R3 at INTERMAT
    April 19, 2012
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More
  • INTERMAT launch for Atlas Copco Edge Drill Monitor
    January 6, 2017
    Atlas Copco used INTERMAT to launch the Edge Drill Monitor – an innovative system of measuring shock waves from down-the-hole drilling. Information about the hammer and the bit is displayed graphically in real time, allowing the operator to extract maximum performance and efficiency as geology changes during the drilling process, to maintain the correct degree of flushing and avoid tool breakage.
    Read More
  • INTERMAT launch for Atlas Copco Edge Drill Monitor
    April 16, 2012
    Atlas Copco used INTERMAT to launch the Edge Drill Monitor – an innovative system of measuring shock waves from down-the-hole drilling. Information about the hammer and the bit is displayed graphically in real time, allowing the operator to extract maximum performance and efficiency as geology changes during the drilling process, to maintain the correct degree of flushing and avoid tool breakage.
    Read More

Highlighted Content