INTERMAT visitors first to see new high flow Bobcat telehandler

Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
January 6, 2017 Read time: 2 mins
The high flow version of Bobcat’s TL470 telehandler
RSS1130 Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler.

The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine.

The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds.

In addition to providing a higher flow rate, the bigger pump is also load sending while the standard unit has a simple gear pump. A 40kmh travel speed is an option with both configurations.

The high-flow machine shares Bobcat’s new cab design, which has no rear pillar on the right hand side. This provides an unobstructed view for the operator while still giving full ROPS and FOPS protection. A screen guard is an option.

www.bobcat.com

Hall: 6 Stand: G079

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Bobcat previews 8.5tonne midi excavator
    January 6, 2017
    Bobcat, a division of Doosan, is showing a prototype of the E85 midi excavator, an 8.5tonne machine powered by a Yanmar 44.3kW Stage IIIB engine. The machine meets the emissions standard through the use of exhaust gas recirculation and a diesel particulate filter (DPF). The reduced tailswing excavator has 4% more power than the previous E80 model, yet is said to offer a 7% improvement in fuel economy. Bucket digging force is also up 7%, and 6,600kg.
    Read More
  • Bobcat previews 8.5tonne midi excavator
    April 16, 2013
    Bobcat, a division of Doosan, is showing a prototype of the E85 midi excavator, an 8.5tonne machine powered by a Yanmar 44.3kW Stage IIIB engine. The machine meets the emissions standard through the use of exhaust gas recirculation and a diesel particulate filter (DPF). The reduced tailswing excavator has 4% more power than the previous E80 model, yet is said to offer a 7% improvement in fuel economy. Bucket digging force is also up 7%, and 6,600kg.
    Read More
  • Bobcat unveils T40180 telehandler
    April 2, 2014
    Bobcat’s new T40180 18m telehandler is the Doosan brand’s largest rigid frame telescopic handler, and, like Bobcat’s T40140 14m model, has increased maximum lifting height based on a new easy-to-use design said to provide class-leading efficiency and productivity backed by state-of-the-art safety systems. The T40180 has a 4tonne maximum lift capacity and a maximum lift height of 17.52m. The lift capacity at top lift height is 2.5tonnes, while at maximum reach of 13.7m, lift capacity is 560kg. Unloaded
    Read More
  • Goodyear introduces new tyres for off-road applications
    January 6, 2017
    The new Hi-Stability technology featured in the latest range of Goodyear tyres is said to increase load capacity in off-road applications by up to 25%. The new tyres have been developed to match the power, speed and torque of the industry’s latest machines. Hi-Stability tyres allow higher inflation pressures, increasing the load capacity of the machines to which they are fitted – it is the air that carries the load. A loader that can hold 9tonnes when fitted with conventional tyres at 5bar can carry 12tonne
    Read More

Highlighted Content