INTERMAT visitors first to see new high flow Bobcat telehandler

Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
January 6, 2017 Read time: 2 mins
The high flow version of Bobcat’s TL470 telehandler
RSS1130 Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler.

The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine.

The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds.

In addition to providing a higher flow rate, the bigger pump is also load sending while the standard unit has a simple gear pump. A 40kmh travel speed is an option with both configurations.

The high-flow machine shares Bobcat’s new cab design, which has no rear pillar on the right hand side. This provides an unobstructed view for the operator while still giving full ROPS and FOPS protection. A screen guard is an option.

www.bobcat.com

Hall: 6 Stand: G079

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Case’s new mid-excavator marvels unveiled at bauma
    January 6, 2017
    Case says the CX75C SR and CX80C, its new and claimed market first Tier 4 Final emissions standard midi-excavators, offer more performance power and greater operator cabin comfort than previous models. Tier 4 Final requirements are said to have been met through the use of Cooled Exhaust Gas Recirculation (CEGR) combined with a Diesel Oxidation Catalyst (DOC) system. Case says there is no requirement for the two new mid-excavators to have a costly Diesel Particulate Filter (DPF), so there is no need for acti
    Read More
  • Case’s new mid-excavator marvels unveiled at bauma
    February 7, 2013
    Case says the CX75C SR and CX80C, its new and claimed market first Tier 4 Final emissions standard midi-excavators, offer more performance power and greater operator cabin comfort than previous models. Tier 4 Final requirements are said to have been met through the use of Cooled Exhaust Gas Recirculation (CEGR) combined with a Diesel Oxidation Catalyst (DOC) system. Case says there is no requirement for the two new mid-excavators to have a costly Diesel Particulate Filter (DPF), so there is no need for acti
    Read More
  • Doosan enters 10-tonne class with the DX100W-7
    October 18, 2022
    Doosan’s new 10-tonne DX100W-7 Wheeled Excavator is definitely a small medium-size machine and not a large compact. However, it offers the best compromise between compactness and agility and has the option of four-wheel steering and a crabbing mode, with two-wheel steering as standard.
    Read More
  • Heavyweight Warrior is a big presence at INTERMAT
    January 6, 2017
    The Warrior 2400 is the largest machine in Powerscreen’s Warrior range and is designed for large-scale operators in the quarrying and mining sectors. It is capable of handling larger feed sizes and has an output potential of up to 800tonnes per hour. It features a heavy-duty incline screen with a high amplitude triple shaft drive mechanism, lending it to screening, scalping, two or three-way splitting and stockpiling materials like aggregates, topsoil, coal, construction, demolition waste and iron ore.
    Read More

Highlighted Content