Skip to main content

INTERMAT visitors first to see new high flow Bobcat telehandler

Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
January 6, 2017 Read time: 2 mins
The high flow version of Bobcat’s TL470 telehandler
RSS1130 Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler.

The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine.

The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds.

In addition to providing a higher flow rate, the bigger pump is also load sending while the standard unit has a simple gear pump. A 40kmh travel speed is an option with both configurations.

The high-flow machine shares Bobcat’s new cab design, which has no rear pillar on the right hand side. This provides an unobstructed view for the operator while still giving full ROPS and FOPS protection. A screen guard is an option.

www.bobcat.com

Hall: 6 Stand: G079

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Diverto reveals Q-Synchro prototype at INTERMAT
    January 6, 2017
    Dutch company Diverto Technologies used INTERMAT to show a prototype multi-purpose vehicle called the Q-Synchro 100. Said to combine the capabilities of an excavator, forklift, tractor and loader in one machine, the Q-Synchro 100 features a full-width two-door cab, 75kW engine and twin-range hydrostatic transmission offering a 40kph road speed. Aimed at utility customers, local authorities and landscape contractors, the innovative machine features an offset boom, and boom folding similar to that used on tr
  • Diverto reveals Q-Synchro prototype at INTERMAT
    April 20, 2012
    Dutch company Diverto Technologies used INTERMAT to show a prototype multi-purpose vehicle called the Q-Synchro 100. Said to combine the capabilities of an excavator, forklift, tractor and loader in one machine, the Q-Synchro 100 features a full-width two-door cab, 75kW engine and twin-range hydrostatic transmission offering a 40kph road speed. Aimed at utility customers, local authorities and landscape contractors, the innovative machine features an offset boom, and boom folding similar to that used on tr
  • Genie’s telehandlers reach new heights at INTERMAT
    January 6, 2017
    Two extended reach telehandlers have been added to Genie’s range with the introduction of the 14metre reach GTH4014 and the GTH4018, which can lift loads to 18metres. The 4tonne capacity Stage IIIB-compliant machines have streamlined chassis to improve the operator’s view of the load and are said to offer best-in-class performance from a smaller footprint. In addition to the small footprint, the machines have tight turning circles (3.8m outside turning radius on the GTH-4018) a narrow overall width, and a
  • Genie’s telehandlers reach new heights at INTERMAT
    April 19, 2012
    Two extended reach telehandlers have been added to Genie’s range with the introduction of the 14metre reach GTH4014 and the GTH4018, which can lift loads to 18metres. The 4tonne capacity Stage IIIB-compliant machines have streamlined chassis to improve the operator’s view of the load and are said to offer best-in-class performance from a smaller footprint. In addition to the small footprint, the machines have tight turning circles (3.8m outside turning radius on the GTH-4018) a narrow overall width, and a