Skip to main content

INTERMAT launch for Volvo DD25 asphalt roller

Designed for smaller compaction projects, Volvo’s DD25 and DD25W are double drum compactors that fit into the 2.5 tonne weight class.
February 7, 2012 Read time: 1 min
Volvo's DD25 live at INTERMAT
%$Linker: 2 Internal 2 4802 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">RSS</span></span> Road Paving and Recycling false /event-news/intermat-2012/rss/road-paving-and-recycling/ true false%>Designed for smaller compaction projects, 2394 Volvo’s DD25 and DD25W are double drum compactors that fit into the 2.5 tonne weight class.

Adjustable frequency is available from 3,300vpm/55 Hz to 4,000vpm/67 Hz, achieved by moving the throttle.

Drums are machined to be perfectly round said Volvo, while the outer 20mm of each drum is chamfered and the edges are given a 9mm radius. These features contribute to a smooth rolling finish that doesn’t mark the asphalt, it said.

Both drums also include a pressurised water system that provides a constant flow to the drum surfaces.

The DD25 compactor uses a 24.8kW three-cylinder diesel engine, and an integral safety system will shut down the engine and apply the brakes should the operator get off the seat.

%$Linker: External 0 0 0 oLinkExternal www.volvoce.com Volvo false http://www.volvoce.com/ false false%>

Hall: 6 Stand: C041 / C042

%$Linker: 2 Internal 2 4824 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/intermat-2012/video/ true false%>

For more information on companies in this article

Related Content

  • Business booming at JLG
    January 6, 2017
    JLG’s diesel-powered 510AJ boom lift, with a working height of 17.81metres, is said by the American firm to be specifically designed and produced for the European market, providing high level access with a spacious work platform. The machine is said to be ideal for use in confined locations and can be set up and re-positioned quickly in narrow, compact spaces. Other work can carry on around it relatively undisturbed due to low sound levels while operating.
  • Business booming at JLG
    April 12, 2012
    JLG’s diesel-powered 510AJ boom lift, with a working height of 17.81metres, is said by the American firm to be specifically designed and produced for the European market, providing high level access with a spacious work platform. The machine is said to be ideal for use in confined locations and can be set up and re-positioned quickly in narrow, compact spaces. Other work can carry on around it relatively undisturbed due to low sound levels while operating.
  • Boom time at JLG
    January 6, 2017
    Unveiled as a prototype at SAIE, Italy in October 2010, the compact 340AJ boom lift can cope with grades and break-over angles up to 45° allowing it to drive on slopes and up ramps. Built to a working height of 12.35metres and with a horizontal outreach of 6.07metres, the 340AJ is said by JLG to meet demands for a broad range of applications. The jib extends to 1.2metres with near vertical operation. When ground conditions get tough, proper off-road performance is ensured by the standard oscillating axle an
  • Boom time at JLG
    April 12, 2012
    Unveiled as a prototype at SAIE, Italy in October 2010, the compact 340AJ boom lift can cope with grades and break-over angles up to 45° allowing it to drive on slopes and up ramps. Built to a working height of 12.35metres and with a horizontal outreach of 6.07metres, the 340AJ is said by JLG to meet demands for a broad range of applications. The jib extends to 1.2metres with near vertical operation. When ground conditions get tough, proper off-road performance is ensured by the standard oscillating axle an