INTERMAT launch for updated D6N

Caterpillar has given its D6N fine grading and muck-shifting dozer an EU Stage IIIb emissions-compliant engine for 2012. The 129kW C6.6 Acert engine now gets a DOC and DPF with passive regeneration, helping the machine to a 2% productivity boost primarily from sharper throttle response. There is also a selectable economy mode – linked to 2nd gear – that automatically shifts the dozer into 3rd gear when reversing, and simultaneously reduces engine revs from 2000 to 1700rpm. This system can give fuel saving
April 20, 2012 Read time: 1 min
D6N gets host of improvements
178 Caterpillar has given its D6N fine grading and muck-shifting dozer an EU Stage IIIb emissions-compliant engine for 2012.

The 129kW C6.6 Acert engine now gets a DOC and DPF with passive regeneration, helping the machine to a 2% productivity boost primarily from sharper throttle response.

There is also a selectable economy mode – linked to 2nd gear – that automatically shifts the dozer into 3rd gear when reversing, and simultaneously reduces engine revs from 2000 to 1700rpm. This system can give fuel savings of up to 25%, said Cat.

The previous generation’s cast blade tower has been replaced by a fabricated and welded steel structure, enabling a ball-socket coupling – similar to that found on the D6T.

www.cat.com

RSS
View more videos

For more information on companies in this article

Related Content

  • Kobelco’s new crawler cranes make European debut at INTERMAT
    January 6, 2017
    Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively. Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduce
    Read More
  • Kobelco’s new crawler cranes make European debut at INTERMAT
    April 20, 2012
    Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively. Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduce
    Read More
  • Emissions regulation leads to efficiency gains
    November 6, 2012
    Innovative technology is use is providing efficient, clean burning engines - Mike Woof reports The development of new diesel engine technology has, for the off-highway equipment sector, been the single most expensive research field for the industry since these machines first started being manufactured. Aimed at reducing the emissions of nitrous oxide as well as particulate matter, in a phased series of stages the engine emission improvements will make major changes to the construction sector. In real world
    Read More
  • Terex launches fully hydraulic self-erecting tower crane
    January 6, 2017
    Terex Cranes introduced the Eazy 90 fully-hydraulic self-erecting tower crane at INTERMAT. Equipped with a maximum 45m jib, the crane has a telescopic main tower with up to three additional mast sections. Erection can be carried out by two people in 2-4 hours depending on specification. The crane is equipped with safety lock-outs to ensure that each stage of erection has been completed before progressing to the next. A single operator is required to work the crane, with the Eazy 90 offering a maximum li
    Read More

Highlighted Content