Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
February 3, 2012
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
Haulotte has introduced the Compact C10DX and C12DX rough terrain scissors lifts. Powered by a Stage IIIB Kubota engine, the machines produce lower noise levels and use 5% less fuel than previous models. The C10DX offers a maximum working height of 10.15m, while the larger C12DX has a 12.15m working height.
The AV 120 X asphalt roller is the latest addition to the family of articulated tandem rollers produced by Ammann. Equipped with 1880mm wide drums, the AV 120 X has been produced for efficient compaction on asphalt mixes and binder courses. An unobstructed view of the drum, a sliding and rotating operator’s station and a drive system with two hydraulic pumps is claimed to deliver improved driving and rolling properties. The 11tonne machine is powered by a Cummins QSB 3.3 engine and delivers a static line lo
The AV 120 X asphalt roller is the latest addition to the family of articulated tandem rollers produced by Ammann. Equipped with 1880mm wide drums, the AV 120 X has been produced for efficient compaction on asphalt mixes and binder courses. An unobstructed view of the drum, a sliding and rotating operator’s station and a drive system with two hydraulic pumps is claimed to deliver improved driving and rolling properties. The 11tonne machine is powered by a Cummins QSB 3.3 engine and delivers a static line lo
2012 sees the start of a new wheeled excavator programme from Liebherr, and the A916 represents the first fruit from the project. Replacing the A316 Litronic, the new A916 has been developed to meet Stage IIIB emissions requirements and has an operating weight from 17-18.1 tonnes depending on specification. Power comes from a four-cylinder 110kW engine with common rail fuel injection, EGR and DOC – a DPF is available as an optional extra for those working inside buildings.
