Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
February 3, 2012
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
Doosan Infracore Construction Equipment will take the covers off five new wheeled loaders at INTERMAT. The DL300-3, DL350-3, DL420-3, DL450-3 and DL550-3 large wheel loaders – with bucket capacities from 3.0 to 5.5cubic metres - get Scania SCR diesel engines that meet stage IIIB emissions regulations.
Following the success of its 8MCR high-speed compact excavator, Mecalac has developed a larger, heavier model, called the 10MCR. Like the smaller machine introduced in 2009, this new model combines the speed and manoeuvrability of a skid steer loader with the functionality of a midi excavator. Weighing in at nine tones and using a 75kW turbocharged diesel engine, the new model retains Mecalac’s MCR concept and uses a triangular track frame profile, which affords fast travel speeds in both directions usin
Following the success of its 8MCR high-speed compact excavator, Mecalac has developed a larger, heavier model, called the 10MCR. Like the smaller machine introduced in 2009, this new model combines the speed and manoeuvrability of a skid steer loader with the functionality of a midi excavator. Weighing in at nine tones and using a 75kW turbocharged diesel engine, the new model retains Mecalac’s MCR concept and uses a triangular track frame profile, which affords fast travel speeds in both directions usin
Manitou Group (MG) president Jean-Christophe Giroux says the Group will look to double its business in the next three to four years after revenue rose by 35% to US$1.13billion in 2011. Speaking on the publication of details of MG’s FY11 performance Giroux, who is also the French construction, industry and agricultural machinery
