Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
January 6, 2017
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
INTERMAT launches from Terex include the TC16 Twin Drive mini excavator, which will debut in its production format. The TC16 gets diesel power and an additional electric motor for emissions-free operation when working inside buildings or confined spaces.
Hatz Diesel will take the wraps off a new engine family at Bauma, with the launch of the H series, a 2.0–litre water-cooled engine family that features Bosch common rail fuel injection with pressures up to 1,800 bar. Producing 56kW (75hp) and 130Nm of torque, the engine meets European Stage IIIB emissions regulations and US Tier 4 Final standards. The engine, a first at this size for the company with liquid-cooling, uses exhaust gas recirculation (EGR) and a diesel oxidation catalyst (DOC) but does without
Hatz Diesel will take the wraps off a new engine family at Bauma, with the launch of the H series, a 2.0–litre water-cooled engine family that features Bosch common rail fuel injection with pressures up to 1,800 bar. Producing 56kW (75hp) and 130Nm of torque, the engine meets European Stage IIIB emissions regulations and US Tier 4 Final standards. The engine, a first at this size for the company with liquid-cooling, uses exhaust gas recirculation (EGR) and a diesel oxidation catalyst (DOC) but does without
Palfinger Platforms has replaced its TKA series access platform with the P300KS. Mounted on a 7.5 tonne truck chassis, the P300KS has a working height of 30m with a maximum outreach to the side or the back of 20.5m. The cage, which offers 540 degrees of rotation, has a maximum load of 350kg.
