Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
January 6, 2017
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
MB Dustcontrol is launching at Intermat 2012 its new range of Dust Suppression SprayCannon units for demolition, recycling, quarrying and handling of bulk material applications. The range contains solutions to diminish the emissions of dust in both inside and outside work areas. The mechanism consists of binding dust particles with droplets of water (fog) sprayed from the SprayCannon. The water droplets weigh down the dust particles, which fall more quickly to the ground through gravity.
MB Dustcontrol is launching at Intermat 2012 its new range of Dust Suppression SprayCannon units for demolition, recycling, quarrying and handling of bulk material applications. The range contains solutions to diminish the emissions of dust in both inside and outside work areas. The mechanism consists of binding dust particles with droplets of water (fog) sprayed from the SprayCannon. The water droplets weigh down the dust particles, which fall more quickly to the ground through gravity.
Lombardini is moving ever closer to offering a 100kW engine as part of its strategy to grow the Kohler KDi series above the 56kW maximum output that currently sits at the top of its range. “We have developed a 3.4litre, four-cylinder engine that will take us to 100kW,” said Lombardini’s marketing and communications manager Nino De Giglio. “The engine is currently being tested and will go into production towards the end of 2014.” De Giglio said the arrival of the new 100kW engine, with its 480Nm of torque, c
Lombardini is moving ever closer to offering a 100kW engine as part of its strategy to grow the Kohler KDi series above the 56kW maximum output that currently sits at the top of its range. “We have developed a 3.4litre, four-cylinder engine that will take us to 100kW,” said Lombardini’s marketing and communications manager Nino De Giglio. “The engine is currently being tested and will go into production towards the end of 2014.” De Giglio said the arrival of the new 100kW engine, with its 480Nm of torque, c
