Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
January 6, 2017
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
To address the needs of the off-road market, Scania has added bigger non-slip steps, an additional step for windscreen cleaning and light guards to its off-road range of tractive units and multi wheelers. As an option the chassis can be supplied with factory-fitted PTO hydraulics and tank to power tipper rams or similar.
Chinese manufacturer Sany Heavy Industry has introduced a five-model crawler excavator range to the European market. The C Series excavators range in operating weight from the 7.5tonne SY75C to the 35.5tonne SY335C, with models at 13.5tonnes, 21.5tonnes and 23.5tonnes. The machines are powered by Stage IIIB Isuzu and Mitsubishi engines. Sany sold more than 20,000 of these machines in the Chinese domestic market in 2011 and is keen to expand its share of the European excavator arena, through its European
Chinese manufacturer Sany Heavy Industry has introduced a five-model crawler excavator range to the European market. The C Series excavators range in operating weight from the 7.5tonne SY75C to the 35.5tonne SY335C, with models at 13.5tonnes, 21.5tonnes and 23.5tonnes. The machines are powered by Stage IIIB Isuzu and Mitsubishi engines. Sany sold more than 20,000 of these machines in the Chinese domestic market in 2011 and is keen to expand its share of the European excavator arena, through its European
Following the successful integration of CDC Dynamic Load Control management in its agricultural telehander range, Merlo is introducing the technology to its construction models at INTERMAT The system is an advanced method of load management, and effectively places a real-time image of the handler’s load chart on a colour screen in the cab, showing the weight and position of the load on the chart, at all times.
