Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
January 6, 2017
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
The new Doosan DX225LCA excavator being launched at Intermat has an operating weight of between 21.5 and 23.2tonnes, depending on the configuration. Its bucket capacity ranges from 0.39 to 1.28m3. It also has a digging depth of 6,620 mm, a reach of 9,900mm and a digging height of 9,750 mm.
The new Doosan DX225LCA excavator being launched at Intermat has an operating weight of between 21.5 and 23.2tonnes, depending on the configuration. Its bucket capacity ranges from 0.39 to 1.28m3. It also has a digging depth of 6,620 mm, a reach of 9,900mm and a digging height of 9,750 mm.
Unitruck’s says its new range of mirrors and arms specifically for plant machinery being showcased at INTERMAT 2012 will be available through Europe’s leading Agricultural and Plant Spare Parts Dealers from this month. Owners of trucks across Europe are already said by the UK firm to be saving millions of Euros each year by fitting Unitruck’s existing range of replacement mirrors.
