Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
January 6, 2017
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
Italian firm Controls has put all its long-standing knowledge of road paving material testing into Dynapave, launched this week at INTERMAT. The Dynapave testing system includes the 78-B7030 model, exhibited at the show, which is a servo-pneumatic dynamic testing system with 30kN capacity that examines indirect tensile stiffness, creep, fatigue, triaxial on unbound materials and under load or displacement control. The system is said by Controls to have a user-friendly interface which allows the operator to
New access solutions have been developed for the TORGAR range by Spanish specialist Saltec. The new compact PT-02 industrial lift has been developed to meet the needs of the tower crane sector, for high mast applications. Meanwhile the new PL-20 is a platform type access machine that offers a 2tonne payload. The PW-6/12 work platform is the firm’s light and robust access machine that is specially designed for renovation jobs, but with a maximum platform length of 24.6m, platform width of 0.7m and maximum (s
New access solutions have been developed for the TORGAR range by Spanish specialist Saltec. The new compact PT-02 industrial lift has been developed to meet the needs of the tower crane sector, for high mast applications. Meanwhile the new PL-20 is a platform type access machine that offers a 2tonne payload. The PW-6/12 work platform is the firm’s light and robust access machine that is specially designed for renovation jobs, but with a maximum platform length of 24.6m, platform width of 0.7m and maximum (s
JCB is expanding its range of mini excavators with the launch of the 8026 CTS. The 8026 CTS joins the range alongside the zero tailswing 8025 ZTS in the line-up. The new 2.7tonne machine offers a conventional layout with a trailer-towable transport weight and increased lifting capacity. The 8026 CTS uses a dedicated boom and dipper arm for greater digging and lifting performance. Increased efficiency allows the 8026 CTS to use the same engine family as the 8025 ZTS, with a similar torque output, but with a
