Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
January 6, 2017
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
