Intelligent machines will be normal within 10 years says Komatsu

Komatsu expects to see ‘intelligent’ machine control as a standard feature on dozers, excavators and potentially other machines within 10 years. It has started the roll-out of its intelligent machines with the D61EXi/PXi-23 dozer and a prototype PC210LCi-10 excavator.
April 16, 2013 Read time: 2 mins
Komatsu has introduced Intelligent machines
2300 Komatsu expects to see ‘intelligent’ machine control as a standard feature on dozers, excavators and potentially other machines within 10 years.

It has started the roll-out of its intelligent machines with the D61EXi/PXi-23 dozer and a prototype PC210LCi-10 excavator.

The Japanese manufacturer has teamed up with 342 Topcon to produce an automated control system, which is built into the machine at the factory.

On the dozer, the system not only senses the machine’s position and cuts to grade, it also detects the load on the blade and will automatically reduce the cut to prevent track slip. 

In integrating the system as a factory fit, all instrumentation has been removed from the blade with the antenna relocated to the top of the cab for improved protection and accuracy, while stroke-sensing cylinders are used to determine the blade’s position.

The system can be used for all types of dozing work, be it rough cutting or finishing, as it automatically switches between the two modes as the cut approaches grade.

The operator has the choice of four dozing modes and three load settings and, during operation, the blade lowers until it meets the target surface or until the blade load reaches a maximum. Before the blade overloads, it is automatically lifted slightly to minimise track slip and maintain forward momentum.

According to Komatsu, this maximises productivity, minimises track wear and allows novice operators to work as productively as the most skilled.

With the PC210LCi excavator, the operator digs as normal without looking at the monitor for grade information. The instrumented machine will not cut below the programmed grade. This reduces the time needed for finishing flat bottom trenches, grading batters and the like without slowing the any preliminary excavations.

According to Komatsu president and CEO Tetsuji Ohashi, productivity gains with intelligent machines could be in the region of 40%, depending on the operation, and payback of the on-cost should be achieved within a year.

He sees a combination of time and cost savings, and the shortage of skilled operators leading to increased uptake in the use of such systems, which will lead to a reduction in the price premium to a point where such systems will be standard fitment within the next 10 years.

Stand: B5.104/304

www.komatsu.eu

View more videos
View more stories

For more information on companies in this article

Komatsu
Topcon

Related Content

  • Rapid adoption of GPS machine control
    February 10, 2012
    The high sophistication of GPS machine control systems has resulted in a fast pace of technological advancement. The three major players in the machine control sector, Leica Geosystems, Topcon and Trimble have all made major gains in recent years. The sophistication of the latest systems can combine satellite position data from the GPS and GLONASS networks with information from total stations to provide precise, high speed machine operation. Further more the firms have also prepared themselves for the intro
    Read More
  • Tecnoidea’s high-beam design eases filter changes
    January 6, 2017
    Tecnoidea has introduced a plate press filtration plant with high-beam design, which is capable of working at pressures up to 16bar and said to speed the location of and replacement of breached filters. The modular design can have up to 100 pairs of filters to cope with flows up to 9,000lit/min and each pair has an individual drain, making it easier to locate breached filters. For ease and speed of replacing breached filter material, the high-beam design incorporates a handling system to remove the relevant
    Read More
  • Tecnoidea’s high-beam design eases filter changes
    April 17, 2013
    Tecnoidea has introduced a plate press filtration plant with high-beam design, which is capable of working at pressures up to 16bar and said to speed the location of and replacement of breached filters. The modular design can have up to 100 pairs of filters to cope with flows up to 9,000lit/min and each pair has an individual drain, making it easier to locate breached filters. For ease and speed of replacing breached filter material, the high-beam design incorporates a handling system to remove the relevant
    Read More
  • Versatile small construction equipment
    February 9, 2012
    Smaller construction equipment offers versatile options, particularly on highway repair and maintenance projects. Patrick Smith reports. Visitors to any highway construction site across the world will see a sizeable amount of utility equipment in action carrying out a variety of tasks. Indeed, because of its smaller, more compact size, such multi-task equipment is essential when repair and maintenance projects are being carried out, particularly in urban areas where space may be limited.
    Read More

Highlighted Content