Ihimer adds to skid steer line-up

Ihimer, the joint venture between Japanese company IHI and Italian firm Imer, has added two skid steer loaders to its growing range of compact equipment. The AS30 and AS34 have operating weights of 3,150kg and 3,500kg respectively, with rated working loads of 850kg and 1,020kg. Power comes from a 50kW Kubota engine in the smaller machine and a 61kW Yanmar motor in the AS34. The company already has a smaller AS12 model, and will launch AS18 and AS22 skid steers at next year’s Bauma show in Munich. IHI also b
January 6, 2017 Read time: 2 mins
Ihimer AS34 Skid steer LIVE at INTERMAT 2012
RSS4848 Ihimer, the joint venture between Japanese company IHI and Italian firm Imer, has added two skid steer loaders to its growing range of compact equipment. The AS30 and AS34 have operating weights of 3,150kg and 3,500kg respectively, with rated working loads of 850kg and 1,020kg. Power comes from a 50kW 1265 Kubota engine in the smaller machine and a 61kW 7139 Yanmar motor in the AS34.

The company already has a smaller AS12 model, and will launch AS18 and AS22 skid steers at next year’s 688 Bauma show in Munich. IHI also builds the CL35 and CL45 compact tracked loaders, and the company says that there will be more cooperation and sharing of technology between the two lines in the future.

www.ihimer.com

Hall: 5A Stand: J100/K129

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Tata Steel highlights new sector focus
    April 17, 2012
    Tata Steel is taking advantage of the show to emphasise its new sector-focused operation and what this means for equipment makers. The company said that the new structure gives a single point of co-ordination and that its wide range of steel ensures that equipment makers get the right product for the job. One of the services it is promoting is a collaborative design-driven approach in which it can work with major equipment makers from the early stages of vehicle development.
    Read More
  • Innovations in compact construction machines
    February 15, 2012
    2011 has already seen a host of new machine introductions among compact equipment makers, and we take a look at some of them in the utility sector With emissions legislation dominating the introduction of new machines over 130kW, smaller equipment has not been overlooked. Most firms have been working feverishly to produce quieter, more economical and more productive equipment and Japanese maker Takeuchi is a good example, having recently introduced a new 8.5 tonne midi excavator.
    Read More
  • Dana shows HVT R3 at INTERMAT
    January 6, 2017
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More
  • Dana shows HVT R3 at INTERMAT
    April 19, 2012
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More

Highlighted Content