Hyundai firms up its compaction equipment offering with the new HR120C-9 at Conexpo-Con/Agg 2014

Hyundai used Conexpo 2014 to launch the HR120C-9, the first in a new range of soil compactors that will only be available in selected markets. The HR120C-9, made for Hyundai by Atlas Weyhausen, is a 12tonne machine equipped with a smooth drum and a permanent front axle weight of 6.9tonnes.
January 6, 2017 Read time: 1 min
HR120C-9 is the first in a range of soil compaction equipment from Hyundai
236 Hyundai used Conexpo 2014 to launch the HR120C-9, the first in a new range of soil compactors that will only be available in selected markets. The HR120C-9, made for Hyundai by 162 Atlas Weyhausen, is a 12tonne machine equipped with a smooth drum and a permanent front axle weight of 6.9tonnes.

Expected to meet Tier 4 final emissions regulations, the compactor uses a selective catalytic reduction (SCR) emissions control system, which requires the use of diesel exhaust fluid.

Hyundai’s HR series of soil compactors is likely to Span operating weights between 12 and 13.9tonnes, and share a drum width of 2.1m. Power comes from a Deutz TCD2012 L4 engine, providing either 96kW and 103kW of output depending on the model.

Elsewhere on its stand, Hyundai also showed off a new backhoe loader at Conexpo 2014, called the H930C. The four-wheel drive, centre-mount backhoe tips the scales at 7.1tonnes and uses a 63kW engine.www.hceamericas.com

For more information on companies in this article

Related Content

  • Bogie suspended rollers for CTL track frames
    January 6, 2017
    Track component supplier Berco has developed a track frame for larger capacity compact tracked loaders that uses a bogie system to suspend the bottom rollers. Initially targeting machines in the 4.3-5.2 tonne sector, with 84-100hp, the track frame has a five-roller design.
    Read More
  • Bogie suspended rollers for CTL track frames
    March 11, 2014
    Track component supplier Berco has developed a track frame for larger capacity compact tracked loaders that uses a bogie system to suspend the bottom rollers. Initially targeting machines in the 4.3-5.2 tonne sector, with 84-100hp, the track frame has a five-roller design.
    Read More
  • SSAB expands range of wear plate thicknesses from 0.7mm to 160mm
    January 6, 2017
    SSAB has expanded its wear plate thicknesses to more closely meet the needs of its customers, the company announced at Conexpo 2014. Providing adequate thickness is a key challenge in the marketplace. SSAB says it now offers wear plate thicknesses that range from 0.7mm to 160mm.
    Read More
  • SSAB expands range of wear plate thicknesses from 0.7mm to 160mm
    March 4, 2014
    SSAB has expanded its wear plate thicknesses to more closely meet the needs of its customers, the company announced at Conexpo 2014. Providing adequate thickness is a key challenge in the marketplace. SSAB says it now offers wear plate thicknesses that range from 0.7mm to 160mm.
    Read More

Highlighted Content