Hydrokit shows dust suppressor for dumptrucks at INTERMAT 2012

On-board dust suppression for dumptrucks has been introduced by Hydrokit. Water spraying takes place in front of the truck as it drives in dusty situations such as quarries.
February 3, 2012 Read time: 1 min
Hydrokit has launched an on-board water spraying system
On-board dust suppression for dumptrucks has been introduced by 2151 Hydrokit. Water spraying takes place in front of the truck as it drives in dusty situations such as quarries.

The dump truck is fitted with a water tank and pump powered by hydraulics on the machine. Water from the tank is sprayed in front of the truck via 10 nozzles across a spray width of approximately 5.5m. The spray bar is located under the machine for better protection.

Hydrokit said that advantages include better visibility on the site and reduced clogging of the engine’s filters. The driver does not have to get out of the machine to fill the on-board water reservoir. Filling takes less than 10 minutes and the system features a self-priming pump. Filling has been designed to be easy. The filling pipe is connected and two valves are tuned. It stops automatically at the end of the filling process.

The water reservoir holds 3,000litres, depending on the dumper type. The water sprayer kit is designed to avoid the production of mud. The volume of water dispensed ranges from 0.5 to 0.6litres/minute at 10km/h and 0.36 to 0.4litres/minute at 15km/h. Pressure is 4bar.

%$Linker: External 0 0 0 oLinkExternal www.hydrokit.com Hydrrokit false http://www.hydrokit.com/ false false%>

%$Linker: 2 Internal 2 4824 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/intermat-2012/video/ true false%>

For more information on companies in this article

Related Content

  • Cat adds more K-series wheeled loaders at INTERMAT
    January 6, 2017
    Cat has added three new models of wheeled loader to its range, badged 924K, 930K and 938K. All share the same basic architecture, differing in wheelbase, axles, machine width and bucket capacities – the latter extend from 1.9-5.0 cubic metres. The biggest change over the H-series models they replace is an all-new cab, offering a massive improvement in ergonomics and comfort. A wider, deeper front windscreen, climate control, seat-mounted joysticks and an ultra-low in-cab noise level of 66dB(a) are among i
    Read More
  • Cat adds more K-series wheeled loaders at INTERMAT
    April 20, 2012
    Cat has added three new models of wheeled loader to its range, badged 924K, 930K and 938K. All share the same basic architecture, differing in wheelbase, axles, machine width and bucket capacities – the latter extend from 1.9-5.0 cubic metres. The biggest change over the H-series models they replace is an all-new cab, offering a massive improvement in ergonomics and comfort. A wider, deeper front windscreen, climate control, seat-mounted joysticks and an ultra-low in-cab noise level of 66dB(a) are among i
    Read More
  • C-series CX470 excavator takes centre stage on Case’s INTERMAT stand
    January 6, 2017
    A 6% increase in lift capacity, greater digging efficiency, reduced emissions and up to 5% lower fuel consumption are the benefits of Case’s new CX470C excavator. The 47 to 50tonne machine has a 9.8litre Stage IIIB engine delivering 270kW at 2,000rpm which contributes to a 5% increase in fuel efficiency and 5% faster cycle times. Some of the savings come from a Boom Economy Control, which automatically reduces engine revs and hydraulic power to the boom when speed and power are not a priority.
    Read More
  • C-series CX470 excavator takes centre stage on Case’s INTERMAT stand
    April 19, 2012
    A 6% increase in lift capacity, greater digging efficiency, reduced emissions and up to 5% lower fuel consumption are the benefits of Case’s new CX470C excavator. The 47 to 50tonne machine has a 9.8litre Stage IIIB engine delivering 270kW at 2,000rpm which contributes to a 5% increase in fuel efficiency and 5% faster cycle times. Some of the savings come from a Boom Economy Control, which automatically reduces engine revs and hydraulic power to the boom when speed and power are not a priority.
    Read More

Highlighted Content