Hydrokit shows dust suppressor for dumptrucks at INTERMAT 2012

On-board dust suppression for dumptrucks has been introduced by Hydrokit. Water spraying takes place in front of the truck as it drives in dusty situations such as quarries.
February 3, 2012 Read time: 1 min
Hydrokit has launched an on-board water spraying system
On-board dust suppression for dumptrucks has been introduced by 2151 Hydrokit. Water spraying takes place in front of the truck as it drives in dusty situations such as quarries.

The dump truck is fitted with a water tank and pump powered by hydraulics on the machine. Water from the tank is sprayed in front of the truck via 10 nozzles across a spray width of approximately 5.5m. The spray bar is located under the machine for better protection.

Hydrokit said that advantages include better visibility on the site and reduced clogging of the engine’s filters. The driver does not have to get out of the machine to fill the on-board water reservoir. Filling takes less than 10 minutes and the system features a self-priming pump. Filling has been designed to be easy. The filling pipe is connected and two valves are tuned. It stops automatically at the end of the filling process.

The water reservoir holds 3,000litres, depending on the dumper type. The water sprayer kit is designed to avoid the production of mud. The volume of water dispensed ranges from 0.5 to 0.6litres/minute at 10km/h and 0.36 to 0.4litres/minute at 15km/h. Pressure is 4bar.

%$Linker: External 0 0 0 oLinkExternal www.hydrokit.com Hydrrokit false http://www.hydrokit.com/ false false%>

%$Linker: 2 Internal 2 4824 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/intermat-2012/video/ true false%>

For more information on companies in this article

Related Content

  • LTM1750-9.1 all-terrain crane joins Liebherr line-up
    February 7, 2013
    Liebherr has developed the LTM1750-9.1, a nine-axle all-terrain crane with a maximum lift capacity of 750 tonnes. The 52m telescopic boom machine is carried by the machine and offers a 154m maximum lift height, with a maximum working radius of 112m. A luffing fly jib can be added in 3.5m increments to take maximum lift height to 91m. Weighing in at 108 tonnes in transport configuration, the LTM puts down 12 tonnes per axle. However if the machine’s boom supports are removed the crane can travel at 11 tonnes
    Read More
  • Asphaltica exhibition and conference will provide asphalt road knowledge
    October 31, 2012
    The global economy is still suffering, and many believe investment in road and other infrastructure is the key to its revival Over the past 14 years in Italy, only 187km of new highways have been made, but, at the same time, the amount of vehicles using the country’s roads has grown by nearly 10 million. It is in this context of financial concern and growing burden on existing road infrastructure that the sixth edition of ASPHALTICA, the only European event exclusively dedicated to the world of asphalt, bit
    Read More
  • Doosan’s powerful new compressor suits duties in extraction markets
    January 31, 2013
    Doosan Portable Power is offering its new large 25/280 portable compressor, which meets Stage IIIB/Tier 4 Interim emission regulations. The 25/280 portable compressor has a free air delivery of 28.3m³/min at a rated operating pressure of 25.1bar. Dual pressure regulation is a standard feature of the 25/280 compressor, allowing it to supply compressed air at operating pressures of both 25.1 or 17.2 bar. Dual pressure regulation expands the scope of applications for the 25/280 compressor which includes poweri
    Read More
  • The Performer improves productivity for Simex planner attachments
    January 6, 2017
    Simex has introduced a visual indication on its planning attachments – the Performer – which enables operators to utilise all a carrier machine’s available power while avoiding stalling. The patented system automatically resets to reflect each machine’s maximum power and, according to the company, the device typically improves production rates by 25 to 30%.
    Read More

Highlighted Content