Herrenknecht delivers small diameter shaft drilling solution

Herrenknecht has developed a boxhole boring machine (BBM), based on its proven microtunnelling pipe jacking technology. The BBM1100 has been designed to drill slot holes and inclined shafts with a diameter of up to 1.1m and a maximum length of 30m. The machine uses a compact crawler base, with a modular jacking frame, cable drum and power pack that can be positioned separately if required.
January 6, 2017 Read time: 1 min
2592 Herrenknecht has developed a boxhole boring machine (BBM), based on its proven microtunnelling pipe jacking technology.

The BBM1100 has been designed to drill slot holes and inclined shafts with a diameter of up to 1.1m and a maximum length of 30m. The machine uses a compact crawler base, with a modular jacking frame, cable drum and power pack that can be positioned separately if required.

The boring unit is positioned within the jacking frame during transportation. When in position the jacking frame can be aligned up to 30 degrees from vertical. The frame is braced against the ground to provide stability and to transfer the operational thrust and torque loads into the rock. The cutting head is designed for hard rock geologies and is equipped with multiple rows of carbide cutters.

Stand: C3 415/514

www.herrenknecht.de

View more videos
View more stories

For more information on companies in this article

Related Content

  • More efficient ground stabilisation with the Allu 3D Positioning System
    January 6, 2017
    The Allu 3D Positioning System will make ground stabilisation works more efficient and more cost-effective, according to the Finnish manufacturer. The GPS-guided system works in conjunction with Allu’s PMX mixing head, which is mounted on an excavator. It is made up from four modules – computer unit with software, touch screen, base station and GPS antennas positioned on the mixing unit. Often used in road construction to firm up soft ground, the ground stabilisation process sees the binder material fed in
    Read More
  • More efficient ground stabilisation with the Allu 3D Positioning System
    April 19, 2013
    The Allu 3D Positioning System will make ground stabilisation works more efficient and more cost-effective, according to the Finnish manufacturer. The GPS-guided system works in conjunction with Allu’s PMX mixing head, which is mounted on an excavator. It is made up from four modules – computer unit with software, touch screen, base station and GPS antennas positioned on the mixing unit. Often used in road construction to firm up soft ground, the ground stabilisation process sees the binder material fed in
    Read More
  • Atlas Copco’s launches new drill rig FlexiROC T45
    February 12, 2013
    Atlas Copco is launching its new top hammer surface drill rig, the FlexiROC T45, along with its new rock drill COP 3060. The company says the new rig, which follows the ROC F9 before it, was to be built on a tried and trusted platform that would provide high-availability and a wide area of use for both large and small applications. Field studies are said to show that the FlexiROC T45 with folding boom, depending upon rock conditions, uses only half as much fuel as its predecessor the ROC F9 using the same
    Read More
  • Advances in tunneling technology offer efficiency
    October 18, 2017
    New developments in tunnelling technologies offer contractors greater efficiencies when constructing new bores. Tunnel boring machines (TBMs) are widely being used in major projects such as the Brenner Base Tunnel in the Austrian Alps. Full face TBMs are highly sophisticated machines featuring a rotating drilling head, which removes the material, and, depending on the type of construction, secures the excavated tunnel with shotcrete, rock bolts and wire mesh or prefabricated segments of reinforced concrete.
    Read More

Highlighted Content