Herrenknecht delivers small diameter shaft drilling solution

Herrenknecht has developed a boxhole boring machine (BBM), based on its proven microtunnelling pipe jacking technology. The BBM1100 has been designed to drill slot holes and inclined shafts with a diameter of up to 1.1m and a maximum length of 30m. The machine uses a compact crawler base, with a modular jacking frame, cable drum and power pack that can be positioned separately if required.
January 6, 2017 Read time: 1 min
2592 Herrenknecht has developed a boxhole boring machine (BBM), based on its proven microtunnelling pipe jacking technology.

The BBM1100 has been designed to drill slot holes and inclined shafts with a diameter of up to 1.1m and a maximum length of 30m. The machine uses a compact crawler base, with a modular jacking frame, cable drum and power pack that can be positioned separately if required.

The boring unit is positioned within the jacking frame during transportation. When in position the jacking frame can be aligned up to 30 degrees from vertical. The frame is braced against the ground to provide stability and to transfer the operational thrust and torque loads into the rock. The cutting head is designed for hard rock geologies and is equipped with multiple rows of carbide cutters.

Stand: C3 415/514

www.herrenknecht.de

View more videos
View more stories

For more information on companies in this article

Related Content

  • Hatz Diesel reduces frictional losses and boosts fuel efficiency
    April 17, 2013
    Hatz has boosted diesel engine efficiency with an all-new four-cylinder 2litre platform that combines low weight with low fuel consumption and meets Tier 4 Final/Stage IV emissions regulations without the need for a DPF. Called the 4H50TIC, the new engine uses two-valve cylinder head design to cut frictional losses, while opting for lower injection pressures of 1,800bar to contribute towards improved fuel efficiency.
    Read More
  • Hatz Diesel develops bolt-on DPF for L and M series engines
    January 6, 2017
    Hatz has revised its three and four cylinder L and M series air-cooled engine packages to comply with emissions regulations by including a cooled EGR system, DOC and DPF with active regeneration. The exhaust after-treatment package can be remote-mounted, said Hatz, and brings a 2dB(A) reduction in exhaust noise to the air-cooled engine.
    Read More
  • Hatz Diesel develops bolt-on DPF for L and M series engines
    April 17, 2013
    Hatz has revised its three and four cylinder L and M series air-cooled engine packages to comply with emissions regulations by including a cooled EGR system, DOC and DPF with active regeneration. The exhaust after-treatment package can be remote-mounted, said Hatz, and brings a 2dB(A) reduction in exhaust noise to the air-cooled engine.
    Read More
  • Steering on drums: the Dynapac CG2300 roller
    February 13, 2013
    Having a long tradition of CG rollers, without central articulation, but with steering on drums, Atlas Copco’s Road Construction Equipment division now launches the Dynapac CG2300 asphalt roller. The roller is 3.95m long and 3m high with an inner turning radius of 3.1m. This means transportation advantages as well as ease of working in restricted areas.
    Read More

Highlighted Content