Skip to main content

Hamm launches four new models in HD CompactLine

Hamm is presenting four newly-developed oscillatory rollers at bauma 2013. It means that the roller manufacturer is offering this environment-friendly and cost-effective compaction technology not only for medium and heavyweight tandem rollers and compactors, but also for the successful articulated rollers in the HD CompactLine.
January 6, 2017 Read time: 2 mins
New models in the HAMM HD CompactLine
228 Hamm is presenting four newly-developed oscillatory rollers at bauma 2013.

It means that the roller manufacturer is offering this environment-friendly and cost-effective compaction technology not only for medium and heavyweight tandem rollers and compactors, but also for the successful articulated rollers in the HD CompactLine.

The new range includes the Hamm HD 10C VT combi roller, which makes its debut at bauma.

The smallest combi roller in the CompactLine, with a working width of 1.06m and operating weight of 1.5tonnes, comes with permanent all-wheel drive as standard, in common with the tried and tested HD 8 and HD 10C tandem rollers. This distinguishes it from all other compact rollers in this size and gives it outstanding climbing ability in all situations.

Hamm dominates the compact tandem roller market segment worldwide with the HD CompactLine. Now with a total of 16 models, it is the largest model range in the sub-4.5tonne weight category on the market.

The advantage of oscillation is that it achieves a very fast increase in compaction because the drum’s direct tangential thrusting forces into the material to be compacted while remaining constantly in contact with the ground. The combination of continuously acting static load and changing dynamic shear forces in the material bring about a faster, better and more gentle compaction.

With the construction of oscillatory rollers in this weight class, Hamm is responding to the increasing demands for high-quality compaction even in extremely small areas. Oscillation increases compaction speed and quality.Applications can be found in urban centres for example.

Up to now, tandem rollers have only been able to operate in static mode on narrow construction sites. In future, oscillatory rollers will compact dynamically, on account of the fact that oscillatory compaction does not disturb buildings or pipework below the road surface through vibration. At the same time, a better compaction result is achieved faster.

Stand: F10.1011/1012

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 12717 0 oLinkExternal www.hamm.eu www.hamm.eu false /EasySiteWeb/GatewayLink.aspx?alId=12717 false false%>

For more information on companies in this article

Related Content

  • Ramtec adds four new ranges of sorting and demolition grabs
    February 15, 2013
    Rotar will use Bauma to launch a new range of attachments with the new RDC Series shears, the RDP Series pulverisers and the RHB Series hydraulic hammers. A new RG Series grab will also be unveiled for excavators from 2tonnes to 60tonnes. The RG range uses a double-framed main housing for stability and the rotator head is driven by a Parker motor with an integrated cross-over valve. The single centred cylinder is standard fitted with a load-control valve. The RHB hydraulic breakers are amongst the quietest
  • Liebherr’s HS8300HD crawler uses hybrid drive to reduce fuel consumption
    January 6, 2017
    Liebherr has developed a hybrid drive system for its HS8300HD heavy duty cycle crawler crane. The 350 tonne machine generates electrical power from its hydraulic free-fall winches, which offer up to 50 tonnes of line pull. Under this Pactronic system surplus energy is stored in a hydraulic accumulator and regenerated to assist the engine, reducing fuel consumption. This reuse of energy also cuts emissions from the machine.
  • Liebherr’s HS8300HD crawler uses hybrid drive to reduce fuel consumption
    February 7, 2013
    Liebherr has developed a hybrid drive system for its HS8300HD heavy duty cycle crawler crane. The 350 tonne machine generates electrical power from its hydraulic free-fall winches, which offer up to 50 tonnes of line pull. Under this Pactronic system surplus energy is stored in a hydraulic accumulator and regenerated to assist the engine, reducing fuel consumption. This reuse of energy also cuts emissions from the machine.
  • Constructing above its weight
    January 6, 2017
    The Kramer Allrad 550 wheel-loader is said to be a machine that constructs above its weight. Despite the machine’s compact design, Kramer claims it offers operators the “full loader performance” of a “big machine”. One of two recently to market Kramer machines for the 0.6m³ class, the 550 is aimed mainly at customers in the construction industry, rental fleets and local authorities.