Skip to main content

Hamm launches four new models in HD CompactLine

Hamm is presenting four newly-developed oscillatory rollers at bauma 2013. It means that the roller manufacturer is offering this environment-friendly and cost-effective compaction technology not only for medium and heavyweight tandem rollers and compactors, but also for the successful articulated rollers in the HD CompactLine.
January 6, 2017 Read time: 2 mins
New models in the HAMM HD CompactLine
228 Hamm is presenting four newly-developed oscillatory rollers at bauma 2013.

It means that the roller manufacturer is offering this environment-friendly and cost-effective compaction technology not only for medium and heavyweight tandem rollers and compactors, but also for the successful articulated rollers in the HD CompactLine.

The new range includes the Hamm HD 10C VT combi roller, which makes its debut at bauma.

The smallest combi roller in the CompactLine, with a working width of 1.06m and operating weight of 1.5tonnes, comes with permanent all-wheel drive as standard, in common with the tried and tested HD 8 and HD 10C tandem rollers. This distinguishes it from all other compact rollers in this size and gives it outstanding climbing ability in all situations.

Hamm dominates the compact tandem roller market segment worldwide with the HD CompactLine. Now with a total of 16 models, it is the largest model range in the sub-4.5tonne weight category on the market.

The advantage of oscillation is that it achieves a very fast increase in compaction because the drum’s direct tangential thrusting forces into the material to be compacted while remaining constantly in contact with the ground. The combination of continuously acting static load and changing dynamic shear forces in the material bring about a faster, better and more gentle compaction.

With the construction of oscillatory rollers in this weight class, Hamm is responding to the increasing demands for high-quality compaction even in extremely small areas. Oscillation increases compaction speed and quality.Applications can be found in urban centres for example.

Up to now, tandem rollers have only been able to operate in static mode on narrow construction sites. In future, oscillatory rollers will compact dynamically, on account of the fact that oscillatory compaction does not disturb buildings or pipework below the road surface through vibration. At the same time, a better compaction result is achieved faster.

Stand: F10.1011/1012

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 12717 0 oLinkExternal www.hamm.eu www.hamm.eu false /EasySiteWeb/GatewayLink.aspx?alId=12717 false false%>

For more information on companies in this article

Related Content

  • Hidromek adds long-reach excavators
    January 6, 2017
    Hidromek has added long-reach options for three of its excavators – the HMK220LC, HMK300LC and the HMK370LC. Aimed at special earthmoving and drainage applications, the excavators carry LR branding and have ground level reach of 15.06, 18.19 and 16.6m respectively. Load over heights range from 10.85m with the HMK220LC LR to 12.59 with the HMK300LC LR. The long-reach HMK220LC delivers 7,300kgf of bucket digging force with a 0.45m3 bucket, with the figures rising to 1m3 and 11,400kgf with the HMK370LC LR.
  • Hidromek adds long-reach excavators
    April 15, 2013
    Hidromek has added long-reach options for three of its excavators – the HMK220LC, HMK300LC and the HMK370LC. Aimed at special earthmoving and drainage applications, the excavators carry LR branding and have ground level reach of 15.06, 18.19 and 16.6m respectively. Load over heights range from 10.85m with the HMK220LC LR to 12.59 with the HMK300LC LR. The long-reach HMK220LC delivers 7,300kgf of bucket digging force with a 0.45m3 bucket, with the figures rising to 1m3 and 11,400kgf with the HMK370LC LR.
  • A new 50tonne class excavator from Hidromek is its biggest yet
    February 6, 2013
    Hidromek is offering an improved excavator series and plans to introduce a new top-of-the-range machine later this year. Export manager Anil Bingöl said, “We are preparing a 50tonne class machine.” He added that this will be offered with a Tier 4 Interim/Stage IIIB emissions rating only, although full specifications of the machine have yet to be revealed. The new 50tonne class excavator will benefit from the latest Hidromek telematics package, which uses satellite communications to provide a continuous flow
  • Oscillation presents an efficient alternative compaction method
    September 27, 2017
    Hamm pioneered the concept of compaction using oscillation rather than vibration and now offers a wide range of machines with this feature, both for soil and asphalt applications. The firm has developed a strong following for its oscillating compactor range, with many contractors now appreciating the benefit of this technology.