Skip to main content

Green road construction project in Sweden

Skanska is a partner in a trial green road construction project in Sweden.
By MJ Woof June 1, 2020 Read time: 3 mins
Reduced CO2 emissions can be achieved in road construction using recycling and other techniques, with a trial project in Sweden aiming to lead the way - image © courtesy of Mike Woof

Contractor Skanska is a key partner in a trial project to construct a ‘green’ road, with minimal CO2 emissions. The Mistra Carbon Exit project will be for an 8km road section, between Lidköping and Källby in Sweden.

The firm is involved in a partnership with researchers at the University of Gothenburg and the Chalmers University of Technology. The aim of the project is to reduce CO2 emissions from road construction between now and 2045.

The trial for the 8km long road strip is one of the first projects launched by the Swedish Transport Administration (Trafikverket) to feature a complete climate calculation based on materials and activities to estimate the total climate impact.

Ida Karlsson, PhD candidate at Chalmers and part of Mistra Carbon Exit, explained that the project makes use of the climate calculations from Skanska to break down the material and activity emissions. The data revealed that emissions were reduced by 20% compared to the Administration's reference values. Moreover, the results showed that the emissions could be halved by making use of existing technology, and removed completely by 2045.

The construction sector accounts for a quarter of carbon dioxide emissions, in Sweden and globally.

“We identified several low hanging fruits, and if we address those first, it will become easier and cheaper to make bigger emission reductions in the future,” says Ida Karlsson, PhD student at Chalmers, and participant in the Mistra Carbon Exit project.

The project Mistra Carbon Exit focuses on transformative solutions. These require both time and large investments and include, for example, production of steel, cement, concrete and asphalt without carbon dioxide emissions, as well as fossil-free or electric vehicles. Solutions are being developed and implemented, but climate-saving technologies and choices exist already today.

Karlsson pointed out that four factors can make significant reductions in CO2 2missions now. These are: transport optimisation; recycling and reuse of excavation materials, asphalt and steel; material efficiency and design optimisation,; replacement of cement clinker as a binder in concrete.

“If you were to optimise the transportation of materials, excavation masses and waste, for example, large gains could be made. We could be better at transport logistics in Sweden. In addition to transporting materials and waste to and from a road construction site, many movements also take place within projects,” she said.

The study ‘Reaching net-zero carbon emissions in construction supply chains - Analysis of a Swedish road construction project’ was published earlier this year in the journal Renewable and Sustainable Energy Reviews, and was written by Ida Karlsson together with colleague Filip Johnsson of Chalmers and Johan Rootzén, at the Gothenburg School of Business, Economics and Law.

https://www.sciencedirect.com/science/article/pii/S1364032119308573

 

For more information on companies in this article

Related Content

  • Hot-to-hot paving upgrades Bremen City Airport runway
    September 30, 2013
    A new high quality runway surface has been laid at Bremen City Airport. This has provided a much-needed replacement at the airport as the old runway was laid over 20 years ago and was suffering from cracking and potholes. Laying the new surface required the airport to be closed, with the work having to be carried out in a tight time schedule. Contractor Heitkamp Erd- und Straßenbau was brought in to carry out the work as the firm had experience in runway rehabilitation projects having carried out pavemen
  • Carry on Movin’ On - Michelin’s mobility event
    October 15, 2018
    Many of the great and the good in the global mobility sector gathered at this year’s Movin’ On event in Montreal. Measured regulation of technologies and safety issues were major themes, reports David Arminas Autonomous vehicles, platooning, smart intersections and safety – these were the talking points over two and half days of the Movin’ On event in Montreal. Everyone in the mobility sector is at the same point, trying to see what mobility will look like in the future. Apparent at the event was just
  • Higher and higher: David Smith argues for more recycled asphalt
    May 16, 2017
    Debate continues to swirl around the use increased recycled asphalt for road surfaces. David Smith, development director at FM Conway urges more cross-sector work to prove the case for a higher recycled asphalt content. The use of recycled materials within our road network is well-established, but a persistent debate continues around the extent to which asphalt can be reused. Although increasing the proportion of recycled asphalt offers significant economic and environmental benefits, there remains a resist
  • Innovative advances in warm Mix Asphalts
    February 1, 2013
    Rising energy costs and increased awareness of safety and environmental issues have encouraged the development of Warm Mix Asphalts (WMA), which are typically produced at temperatures of between 130°C and 145°C, compared with around 175°C for traditional Hot Mix Asphalt (HMA). WMAs are regularly used in many European countries, as well as both North and South America. The three most common ways to lower the working temperature of asphalt are: a) foaming technologies; b) wax additives; and c) chemical (surfa