GOMACO has updated its sophisticated G+ control system

The G+ Connect is GOMACO’s latest proprietary CAN-based network products allowing fast, two-way communication between all accessories and the G+ controller. This closed-loop control system for the electronics and hydraulics links the paver’s valves and various sensors and delivers high accuracy. The system is said to allow tighter, faster, and more accurate machine corrections and improves communications between components for precision setup and paving. The G+ Connect uses the G+ control system and GOMACO’
January 6, 2017 Read time: 2 mins
GOMACO has developed a sophisticated new paving control
The G+ Connect is 218 Gomaco’s latest proprietary CAN-based network products allowing fast, two-way communication between all accessories and the G+ controller. This closed-loop control system for the electronics and hydraulics links the paver’s valves and various sensors and delivers high accuracy. The system is said to allow tighter, faster, and more accurate machine corrections and improves communications between components for precision setup and paving. The G+ Connect uses the G+ control system and GOMACO’s new paving software. The system includes leg positioning, paving speed and percentage of drive, steering, travel information, grade information and deviation meters and also offers a detailed fault history. The system allows all the components of a GOMACO paver to be interfaced, including 3D stringless control, IDBI, tie bar inserter (TBI), power transition adjustors and GOMACO Smoothness Indicator (GSI) for example. The software has been developed in-house by GOMACO’s own control specialists. The system is now offered on the firm’s 2800 paver as well as other models in the range.

Stand: F12.1210/3

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 12713 0 oLinkExternal www.gomaco.com www.gomaco.com false /EasySiteWeb/GatewayLink.aspx?alId=12713 false false%>

For more information on companies in this article

Related Content

  • New paver control from Topcon
    January 6, 2017
    Topcon’s latest P-32 asphalt paving control has the 3.5 inch, full-colour GC-35 LED display, graphical display control box and allows one operator to control both sides of the paver. It includes Topcon’s Sonic Tracker and slope sensor and is compatible with the Smoothtrac sonic averaging system. “The operator can view elevation and slope values of the screed from a single box, a time-saving feature made possible by refining existing, time-tested machine control technologies from Topcon and combining them wi
    Read More
  • New paver control from Topcon
    April 18, 2013
    Topcon’s latest P-32 asphalt paving control has the 3.5 inch, full-colour GC-35 LED display, graphical display control box and allows one operator to control both sides of the paver. It includes Topcon’s Sonic Tracker and slope sensor and is compatible with the Smoothtrac sonic averaging system. “The operator can view elevation and slope values of the screed from a single box, a time-saving feature made possible by refining existing, time-tested machine control technologies from Topcon and combining them wi
    Read More
  • Sophisticated weighing for loaders
    January 28, 2014
    Sophisticated on-board weighing systems for use with wheeled loaders and excavators are being offered by Loup Electronics. The innovative LOADEX 100 is a retrofittable scale installed on tracked and wheeled excavators and material handlers to weigh the amount of material load in the bucket or grab. Pressure signals are captured, filtered and corrected by measuring the angle of the main boom using either an RDS Inclinometer or Mechanical Angle sensor. When used dynamically, the pressures are captured through
    Read More
  • Sophisticated weighing for loaders
    January 6, 2017
    Sophisticated on-board weighing systems for use with wheeled loaders and excavators are being offered by Loup Electronics. The innovative LOADEX 100 is a retrofittable scale installed on tracked and wheeled excavators and material handlers to weigh the amount of material load in the bucket or grab. Pressure signals are captured, filtered and corrected by measuring the angle of the main boom using either an RDS Inclinometer or Mechanical Angle sensor. When used dynamically, the pressures are captured through
    Read More

Highlighted Content