FRD adds crushers and shears to demolition attachment range

Furukawa Rock Drill (FRD) is extending its hydraulic attachment line-up with additional V Series jaw crushers and shears. The company has extended its VM Series of rotating crushers from two to seven models, now suitable for excavators of 12-100 tonnes operating weight. In addition FRD will offer the VS Series of secondary demolition crushers for 11-50 tonne excavators, along with the VR Series of steel cutters with both fixed and rotating heads, which can be both boom or dipper stick mounted.
January 6, 2017 Read time: 1 min
7140 Furukawa Rock Drill (FRD) is extending its hydraulic attachment line-up with additional V Series jaw crushers and shears. The company has extended its VM Series of rotating crushers from two to seven models, now suitable for excavators of 12-100 tonnes operating weight. In addition FRD will offer the VS Series of secondary demolition crushers for 11-50 tonne excavators, along with the VR Series of steel cutters with both fixed and rotating heads, which can be both boom or dipper stick mounted.

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.RFD.eu www.RFD.eu false http://www.rfd.eu/ false false%>

For more information on companies in this article

Related Content

  • Montabert revives popular 501 breaker name
    April 22, 2013
    Montabert has updated its most well-known hydraulic breaker. When the French company started making hammers 40 years ago, its first breaker was called the BRH501. Now Montabert is launching a new series of breakers and the first model is called the 501 Next Generation. Weighing in at 730kg, the breaker has the same power as Montabert’s previous 1,000kg models. This increase in power to weight will allow demolition contractors to use the breaker on longer reach machines, or on smaller excavators if required.
    Read More
  • Hatz will unveil the H series water-cooled 2.0-litre engine line at Bauma
    January 6, 2017
    Hatz Diesel will take the wraps off a new engine family at Bauma, with the launch of the H series, a 2.0–litre water-cooled engine family that features Bosch common rail fuel injection with pressures up to 1,800 bar. Producing 56kW (75hp) and 130Nm of torque, the engine meets European Stage IIIB emissions regulations and US Tier 4 Final standards. The engine, a first at this size for the company with liquid-cooling, uses exhaust gas recirculation (EGR) and a diesel oxidation catalyst (DOC) but does without
    Read More
  • Hatz will unveil the H series water-cooled 2.0-litre engine line at Bauma
    February 7, 2013
    Hatz Diesel will take the wraps off a new engine family at Bauma, with the launch of the H series, a 2.0–litre water-cooled engine family that features Bosch common rail fuel injection with pressures up to 1,800 bar. Producing 56kW (75hp) and 130Nm of torque, the engine meets European Stage IIIB emissions regulations and US Tier 4 Final standards. The engine, a first at this size for the company with liquid-cooling, uses exhaust gas recirculation (EGR) and a diesel oxidation catalyst (DOC) but does without
    Read More
  • Missouri’s Blanchette Bridge gets smaller and smaller
    December 10, 2012
    Missouri’s Blanchette Bridge is now even more abridged. Just a few weeks after explosives took out the West Struss Span, the remaining steel truss on the bridge’s westbound lanes was blown up by demolition crews on Tuesday December 5, 2012. More than 2,000tonnes of steel dropped over 300m into the Missouri River. A 107m section of the Blanchette Bridge was brought down last month. The Blanchette Bridge blasting is part of a US$63 million, year-long project to replace the westbound span.
    Read More

Highlighted Content