Skip to main content

EV tests to optimise their performance with power grids

Researchers at the US Department of Energy's National Renewable Energy Laboratory (NREL) have released a technical report that could help improve the performance of electric vehicles (EVs) and the efficiency of the electric utility grids that power them.The report documents a series of test procedures designed to enable engineers, designers and utilities to evaluate the performance of various EVs and hybrids to optimise how they connect with electric utility grids today - and "smart grids" in the future.
April 26, 2012 Read time: 2 mins
Researchers at the 5275 US Department of Energy’s National Renewable Energy Laboratory (NREL) have released a technical report that could help improve the performance of electric vehicles (EVs) and the efficiency of the electric utility grids that power them.

The report documents a series of test procedures designed to enable engineers, designers and utilities to evaluate the performance of various EVs and hybrids to optimise how they connect with electric utility grids today – and “smart grids” in the future. As more vehicles with large batteries come into use and smart grid technology advances, grid operators in the future may be able to take advantage of the two-way flow of power from EVs and hybrids plugged into utility grids to smooth spikes in demand and improve the reliability of their systems. Evaluating today’s vehicle technologies will advance the goal of transforming the nation’s transportation system to maximize efficiency and use of clean energy.

Engineering vehicles capable of interconnecting to the power system for bi-directional power flow is a key component of emerging “vehicle-to-grid” systems, in which plug-in EVs communicate with the power grid to deliver electricity or modulate their charging rates. The global vehicle-to-grid (V2G) market is expected to grow at a rapid pace, reaching the US$2.25 billion mark in 2012 and accelerating to $40.4 billion by 2020, according to a new market analysis from GlobalData.

“This report offers the first nationally available set of test procedures for V2G applications,” NREL Director of Energy Systems Integration Ben Kroposki said. “Unleashing the potential of electric vehicles to optimise grid performance will be instrumental as the world moves to a smart grid with much higher use of renewables, energy storage and load control.

The NREL report, Interim Test Procedures for Evaluating Electrical Performance and Grid Integration of Vehicle-to-Grid Applications, is available at %$Linker: External 0 0 0 oLinkExternal this link Interim Test Procedures for Evaluating Electrical Performance and Grid Integration of Vehicle-to-Grid Applications false http://www.nrel.gov/docs/fy11osti/51001.pdf. false false%>.

For more information on companies in this article

Related Content

  • INTERMAT launch for Perkins Stage IV solution
    April 16, 2012
    Perkins used INTERMAT to reveal its six-cylinder solution to meet US EPA Tier 4 Final/EU Stage IV emissions regulations due in 2014. Top of the six-cylinder range is the twin turbo, 1206F-E70TTA – a 7litre engine capable of producing up to 225kW. Key to the engine’s cleanliness is a revised emissions module that now adds an SCR system to the existing DOC and DPF elements, but without increasing its physical size.
  • Asphaltica exhibition and conference will provide asphalt road knowledge
    October 31, 2012
    The global economy is still suffering, and many believe investment in road and other infrastructure is the key to its revival Over the past 14 years in Italy, only 187km of new highways have been made, but, at the same time, the amount of vehicles using the country’s roads has grown by nearly 10 million. It is in this context of financial concern and growing burden on existing road infrastructure that the sixth edition of ASPHALTICA, the only European event exclusively dedicated to the world of asphalt, bit
  • Hybrid excavator offers 20% fuel saving and cut in CO2
    January 6, 2017
    Hitachi Construction Machinery (Europe) is evaluating demand for its ZH200 Hybrid excavator in Europe. The 20 tonne excavator, which is already sold in Japan, uses a hydraulic/electric swing motor to generate electrical power under braking, which is stored in a capacitor alongside the machine’s cooling pack. The electrical power is used to boost slew speed and also feeds a secondary hydraulic motor, to assist the diesel engine when there is a demand for hydraulic power.
  • Hybrid excavator offers 20% fuel saving and cut in CO2
    April 17, 2012
    Hitachi Construction Machinery (Europe) is evaluating demand for its ZH200 Hybrid excavator in Europe. The 20 tonne excavator, which is already sold in Japan, uses a hydraulic/electric swing motor to generate electrical power under braking, which is stored in a capacitor alongside the machine’s cooling pack. The electrical power is used to boost slew speed and also feeds a secondary hydraulic motor, to assist the diesel engine when there is a demand for hydraulic power.