Eurovia meets the 100% RAP “Recyclee” challenge on a French motorway

Eurovia says that it has successfully paved a 1km stretch of a French motorway using 100% recycled asphalt pavement – a global first for RAP. Eurovia said that the “fully recycled road”, done in conjunction with its parent company VINCI Autoroutes, is part of a major motorway renovation project on the A10 between Pons and Saint-Aubin in southwest France. The road is the result of two years of research and a partnership with asphalt plant equipment maker Marini-Ermont of the Fayat group. Marini-Ermont
October 25, 2018 Read time: 3 mins
Not a virgin in sight: Marini-Ermont created the TRX100% mobile continuous asphalt plant to use 100% RAP

3281 Eurovia says that it has successfully paved a 1km stretch of a French motorway using 100% recycled asphalt pavement – a global first for RAP.

Eurovia said that the “fully recycled road”, done in conjunction with its parent company 6531 VINCI Autoroutes, is part of a major motorway renovation project on the A10 between Pons and Saint-Aubin in southwest France.

The road is the result of two years of research and a partnership with asphalt plant equipment maker Marini-Ermont of the 2779 Fayat group. Marini-Ermont created the TRX100% mobile continuous asphalt plant that can handle up to 100% of asphalt aggregates that originate at nearby road maintenance sites.

Other partners include the government of the Nouvelle Aquitaine region and PACA Laboratories.

This development represents significant progress compared with the current recycling rates of 50-60%, Eurovia said in a written statement.

The bulk of the supply can be sourced from milling material produced by the site. This would partly or fully protect natural  resources and keep transport logistics to a minimum. It also would cut up 50% the site’s carbon footprint, Eurovia claimed.

VINCI Autoroutes, which operates nearly 4,500km of French motorways, is part of the French global infrastructure company VINCI. The project to use 100% RAP is one of four similarly environmentally based projects that together make up the “Route du futur” scheme launched by ADEME, France’s Environment and Energy Management Agency.

Routes du future is, in turn, part of the Investing for the Future Programme to promote the development of innovative and ambitious industrial solutions to reduce the environmental impact of road infrastructure and support the energy transition in the road industry.

The three other Routes du future project are NOVATHERM, I-Street and REGIC.


The NOVATHERM project, being coordinated by Eurovia, includes working with the governments of the Auvergne-Rhône-Alpes, Nouvelle Aquitaine and the Ile-de-France regions. The object is to harness the solar-induced energy of a road and channel it into geothermal or biomass energy for use in nearby towns, be it for street lighting or electricity for shops and factories or social housing heating.

Part of the NOVATHERM work is to explore the extraction of heat during the hot summer months and during winter using the technology to reverse the energy flow to heat the pavement to reduce the risk of ice and to melt snow.

I-STREET is a project coordinated by EIFFAGE and done by TOTAL, French research group IFSTTAR using its fatigue carousel in Nantes and pigment producer PME OLIKROM. The goal is to develop more wear-resistant coatings for asphalt.

The use of “intelligent geo-synthetic reinforcements” – project REGIC – is to inhibit the creation of cavities in pavement. The work is being done by engineering textile manufacturer Texinov in conjunction with Ineris (Institut national de l'environnement industriel et des risques) and the laboratory 3SR (Sols, Solides, Structures, Risques).

For more information on companies in this article

Related Content

  • Innovative asphalt recycling system from E-Mak
    August 21, 2013
    Asphalt plant specialist E-Mak has developed and patented a hot recycling system that saves energy while ensuring bitumen is not damaged during the material recycling process. Cleverly, its new plant re-uses heat generated by the burner and flows it through the tower to improve heat regeneration to maintain product quality. Careful development of flights inside the tower increase the time it takes for material to descend, which also provides additional mixing capability while boosting heat absorption. E
    Read More
  • Rebuilding a scenic route in South Africa
    April 20, 2018
    Equipment from Wirtgen has played a key role in the rehabilitation of a major route in Cape Town. The scenic Camps Bay Drive provides access to Camps Bay and Hout Bay Based on the project brief and geometric analysis, Camps Bay Drive required widening to cope with high volumes of tourist traffic and MyCiti buses. In order to minimise the impact on traffic, the design brief targeted construction outside the summer peak tourist season and also required investigation into shortened construction periods. The
    Read More
  • Super job for a Demag CC 3800-1 without a Superlift counterweight
    July 4, 2019
    A Demag CC 3800-1 crane with an 84m-long main boom was recently set up in Germany without a Superlift counterweight to save space. The jobsite was the replacement of the old viaduct on the A45 Freeway that spans the Lahn River near Dorlar in Germany. Bietigheim-Bissingen-based crane service provider Wiesbauer solved the site’s space issues by using a Demag CC 3800-1. “This site required us to lift loads of 96-148tonnes at radii of 40-64m, so there was no option but to use a crawler crane in the 650tonne c
    Read More
  • Bentley Systems boosting business with acquisition
    February 11, 2015
    Construction software specialist Bentley Systems continues to develop its portfolio of solutions with yet another acquisition. The company is growing both organically and through acquisition, this time buying up the French firm Acute3D, provider of Smart3DCapture software for reality modelling. Through reality modelling, observations of existing conditions can be processed into representations for contextual alignment within design modelling and construction modelling environments. According to Bentley, rap
    Read More

Highlighted Content