Skip to main content

Europe's politicians continue to debate motorcycle safety issues

The European Parliament's Committee on the Internal Market and Consumer Protection (IMCO) has voted in Brussels on its report on the proposal for a regulation on the approval and market surveillance of two- and three wheelers and quadricycles.
April 27, 2012 Read time: 2 mins
The European Parliament's Committee on the Internal Market and Consumer Protection (IMCO) has voted in Brussels on its report on the proposal for a regulation on the approval and market surveillance of two- and three wheelers and quadricycles. In the view of IMCO, as from 2016 motorcycles will have to become cleaner and manufacturers must apply ABS, even for light motorcycles. And as from 2014, measures to prevent powertrain modifications (which are still to be developed) must be applied. The rules will require owners to present their bikes for inspection when carrying out ‘substantial’ modifications. Today's vote provides a reference and recommendation for the final vote of the European Parliament, which is expected to be held by the beginning of 2012. Before the vote was carried - about 35 IMCO members voted around 100 times on compromises, single amendments and blocs of amendments - IMCO chairman Malcolm Harbour referred to an impact assessment, dealing with timelines, emission limits, ABS and anti-tampering measures, which has just started and whose outcome is expected to influence Parliament's final vote. With regard to powertrain modifications [Article 18] IMCO adopted a compromise in line with the 2465 European Commission's logic, with delegated acts laying down measures for manufacturers to prevent subsequent modifications by the user that may have adverse effects on safety or the environment. Additionally IMCO added a new article 18a which requires that users seek inspection and approval ‘by the competent authorities’ in case of substantial powertrain modifications. ‘A modification is deemed to be substantial when it renders the original type approval obsolete’ or when it harms safety or the environment. Aline Delhaye, General Secretary of Fema said, "This regulation contains many good parts 2906 Fema is in line with, like durability requirements and improved access to repair and maintenance information for the user. But if the current text of article 18 is finally adopted, it will mean that all the usual changes motorcyclists make for riding comfort, fuel efficiency, or simply to suit their riding style, will be illegal or will have to be checked and approved, even this has not been a problem so far and there is no reason why it should become a problem tomorrow. Fema will certainly keep on working on this regulation."

For more information on companies in this article

Related Content

  • Europe extends engine emissions deadline
    July 16, 2020
    Europe is extending the engine emissions deadline.
  • Powered two wheeler safety plan for Europe
    November 16, 2015
    A new road safety strategy for powered two wheelers in Europe has been set out jointly following discussions. The results of analysis have been set out in a joint position statement by the bodies FEMA, FIM and FIM Europe. In the draft report FEMA and FIM have identified seven major areas of great importance that are in accordance with the positions of the riders’ organisations in Europe and elsewhere. Key recommendations and statements from the OECD-ITF draft report highlight issues for the safety of powe
  • Improving safety barriers for motorcyclists
    February 20, 2012
    Delays to better barrier safety pose further risks for Europe's powered two wheeled riders. The issue of safety for powered two wheeler riders (PTWRs) is a matter of some debate in Europe. Although Europe's PTWRs make up a mere fraction of the vehicle population, they figure highly in accident statistics. Safety provisions could be improved using available technology but a recent political decision has downgraded the importance of such a move.
  • Europe extends engine emissions deadline
    November 5, 2020
    The vote paves the way for the final adoption and publication in the Official Journal of the amended version of Regulation (EU) 2016/1628.