Dynapac shows new-generation CA rollers at INTERMAT 2012
Dynapac’s new fifth generation CA single drum vibratory rollers are the first of their type with cross-mounted engines and they can run using a mix of biodiesel and diesel.
January 31, 2012
Read time: 2 mins
The CA6000: fifth generation roller
206 Dynapac’s new fifth generation CA single drum vibratory rollers are the first of their type with cross-mounted engines and they can run using a mix of biodiesel and diesel.
The CA5000, CA6000 and CA6500 compactors feature a fuel-saving system designed to reduce fuel consumption and CO2 emissions and new design to make servicing and maintenance easier.
Among other new features are optimised amplitude for improved compaction performance and ‘Active Bouncing Control’ to prevent damage to the machine and over-compaction.
The three new CA rollers have static linear loads of 50, 60 and 65kg/cm, respectively. The amplitude of 2.1mm is designed to allow rock fill to be compacted in almost 2m-thick layers and the rock size can be up to 1m in diameter. This results in higher volume capacity and fewer passes to reach compaction specifications, said Dynapac, giving fuel savings and reducing the cost per compacted cubic metre.
The new CA rollers are available with Stage IIIB engines (prepared for Stage IV) from 201 Deutz. They can be used with a mix of biodiesel and fossil diesel fuel; some can be run on 20% biodiesel. A fuel-saving system is designed to minimise fuel consumption and CO2 emissions by ensuring that the roller does not consume more power than needed at any time.
The new Tier 4 Final/Stage IV emission certified engine range from Deutz is being introduced. This complete line-up of diesels meets the coming noise and exhaust emission requirements in Europe and the US and offers capacities from 2.9-16litres. The low emissions performance is achieved using the Deutz DVERT technology, a package of technical solutions that is used in modular form with varying options used to ensure each engine capacity meets the requirements. Compact design and high torque output are claim
Dynapac is now offering the PaveSmart 3D package from Leica Geosystems as part of a system alongside the Dynapac PaveManager v1.0 levelling system. The sophisticated PaveSmart 3D machine control system is being offered on the new-generation SD2500C/CS and SD2550C/CS asphalt pavers.
Dynapac is now offering the PaveSmart 3D package from Leica Geosystems as part of a system alongside the Dynapac PaveManager v1.0 levelling system. The sophisticated PaveSmart 3D machine control system is being offered on the new-generation SD2500C/CS and SD2550C/CS asphalt pavers.
Dynapac continues to innovate with its paver range, following from previous developments in 2010 and 2011. The firm says it is now improving the operator´s environment and transport sizes, as well as gearing up to meeting future exhaust emission regulations. The firm introduced six new tracked asphalt pavers with paving widths of 2-14m. Of these, the four sophisticated PLC-controlled pavers SD2500 C / SD2500 CS / SD2550 C / SD2550 CS are designed to meet the needs of contractors, communities and rental comp
