Dynapac shows new-generation CA rollers at INTERMAT 2012
Dynapac’s new fifth generation CA single drum vibratory rollers are the first of their type with cross-mounted engines and they can run using a mix of biodiesel and diesel.
January 6, 2017
Read time: 2 mins
The CA6000: fifth generation roller
206 Dynapac’s new fifth generation CA single drum vibratory rollers are the first of their type with cross-mounted engines and they can run using a mix of biodiesel and diesel.
The CA5000, CA6000 and CA6500 compactors feature a fuel-saving system designed to reduce fuel consumption and CO2 emissions and new design to make servicing and maintenance easier.
Among other new features are optimised amplitude for improved compaction performance and ‘Active Bouncing Control’ to prevent damage to the machine and over-compaction.
The three new CA rollers have static linear loads of 50, 60 and 65kg/cm, respectively. The amplitude of 2.1mm is designed to allow rock fill to be compacted in almost 2m-thick layers and the rock size can be up to 1m in diameter. This results in higher volume capacity and fewer passes to reach compaction specifications, said Dynapac, giving fuel savings and reducing the cost per compacted cubic metre.
The new CA rollers are available with Stage IIIB engines (prepared for Stage IV) from 201 Deutz. They can be used with a mix of biodiesel and fossil diesel fuel; some can be run on 20% biodiesel. A fuel-saving system is designed to minimise fuel consumption and CO2 emissions by ensuring that the roller does not consume more power than needed at any time.
Fiorella Industrie is a vibrant firm specialising in the manufacture of tie rods, tie rod ends, ball joints, axial ball joints and other steering and suspension components for tractors, agricultural machinery, off-highway and automotive vehicles.
Fiorella Industrie is a vibrant firm specialising in the manufacture of tie rods, tie rod ends, ball joints, axial ball joints and other steering and suspension components for tractors, agricultural machinery, off-highway and automotive vehicles.
Komatsu is introducing it Dash 7 generation of wheeled loaders with a range of models including the WA320-7 and WA380-7. The new WA380-7 weighs in at 18tonnes and features improved efficiency, lower fuel consumption, improved operator comfort, and better serviceability. Power comes from an SAA6D107E-2 Komatsu diesel rated at 143kW and which meets Tier 4 Interim/Stage IIIB emission requirements. Power output and toque have been increased over the previous generation engine used in the WA380-6, while fuel con
Komatsu is introducing it Dash 7 generation of wheeled loaders with a range of models including the WA320-7 and WA380-7. The new WA380-7 weighs in at 18tonnes and features improved efficiency, lower fuel consumption, improved operator comfort, and better serviceability. Power comes from an SAA6D107E-2 Komatsu diesel rated at 143kW and which meets Tier 4 Interim/Stage IIIB emission requirements. Power output and toque have been increased over the previous generation engine used in the WA380-6, while fuel con
