DX300 and DX340 get stage IIIB engines at INTERMAT

Doosan’s DX300LC-3 and DX340LC-3 excavators get the Korean maker’s DL08K common rail six-cylinder turbocharged diesel engine meeting stage IIIB emission regulations thanks to EGR and DPF technologies.
January 6, 2017 Read time: 1 min
DX300LC and DX340LC use EGR and DPF technology to meet stage IIIB emissions levels
695 Doosan’s DX300LC-3 and DX340LC-3 excavators get the Korean maker’s DL08K common rail six-cylinder turbocharged diesel engine meeting stage IIIB emission regulations thanks to EGR and DPF technologies.

At 159kW, the DL08K engine in the DX300LC-3 excavator delivers two per cent more power at a lower engine speed of 1,800rpm when compared to the existing stage IIIA version.

It is a similar story with the 210kW DX340LC-3 – the fettled excavator brings operators a seven per cent increase in power, also at lower engine revs.

Doosan said factory tests show a 5-10per cent reduction in fuel consumption.

And a new ECO gauge on the control panel monitors fuel rate and actual engine-percent load. Doosan has also added two new operating modes: Power Plus and Lifting, to further improve controllability and efficiency.

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.doosanequipment.eu Doosan false http://www.doosanequipment.eu/ false false%>

%$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 4824 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/intermat-2012/video/ true false%>

For more information on companies in this article

Related Content

  • Cummins launches SCR only Stage IV/Tier 4 engines
    April 16, 2013
    Cummins used bauma to reveal the QSF3.8 – a four-cylinder engine platform delivering a power range of 63-89kW – which is ready to meet Stage IV/Tier 4 Final emissions regulations. Using only SCR for its exhaust after-treatment process, the QSF3.8 avoids the need for either DOC or DPF as a result of using a high-efficiency catalyst to convert oxides of nitrogen at lower exhaust temperatures while requiring only low doses of DEF, said the company.
    Read More
  • MTU fills power gap with 1600 series engines
    April 17, 2013
    Torgnum Group used bauma 2013 to reveal its new MTU 1600 Series engine platform, developed specifically for off-highway use, that meets EPA Tier 4 Final emissions requirements. In 17.5litre capacity V10 format and 21litre V12, the two new diesel engines span a power range from 567kW-730kW, and provide peak torque figures of 3,500Nm and 4,200Nm respectively. “These two new engine formats slot into our range between the 1500 Series and the 2000 Series engine ranges,” said Mirko Gutemann, Tognum Group marketin
    Read More
  • MTU fills power gap with 1600 series engines
    January 6, 2017
    Torgnum Group used bauma 2013 to reveal its new MTU 1600 Series engine platform, developed specifically for off-highway use, that meets EPA Tier 4 Final emissions requirements. In 17.5litre capacity V10 format and 21litre V12, the two new diesel engines span a power range from 567kW-730kW, and provide peak torque figures of 3,500Nm and 4,200Nm respectively. “These two new engine formats slot into our range between the 1500 Series and the 2000 Series engine ranges,” said Mirko Gutemann, Tognum Group marketin
    Read More
  • MTU fills power gap with 1600 series engines
    April 17, 2013
    Torgnum Group used bauma 2013 to reveal its new MTU 1600 Series engine platform, developed specifically for off-highway use, that meets EPA Tier 4 Final emissions requirements. In 17.5litre capacity V10 format and 21litre V12, the two new diesel engines span a power range from 567kW-730kW, and provide peak torque figures of 3,500Nm and 4,200Nm respectively. “These two new engine formats slot into our range between the 1500 Series and the 2000 Series engine ranges,” said Mirko Gutemann, Tognum Group marketin
    Read More

Highlighted Content