Doosan to launch improved 6tonne midi

Doosan Construction Equipment has shown a prototype of its 6tonne DX62R-3, a replacement for the DX60R. Due to be launched in the second half of the year, the machine delivers a 33% increase in hydraulic flow from a new load sensing system. Digging forces are said to be greatly improved, with bucket force now up to 4,400kg, and increase of 7%, while dipper arm force is up to 2.9tonnes. This improved performance has been combined with a longer arm for a larger working range. The machine uses the same cab tha
April 16, 2013 Read time: 2 mins
DX60R-3 will offer more power and performance
695 Doosan Construction Equipment has shown a prototype of its 6tonne DX62R-3, a replacement for the DX60R.

Due to be launched in the second half of the year, the machine delivers a 33% increase in hydraulic flow from a new load sensing system.

Digging forces are said to be greatly improved, with bucket force now up to 4,400kg, and increase of 7%, while dipper arm force is up to 2.9tonnes. This improved performance has been combined with a longer arm for a larger working range.

The machine uses the same cab that features on larger models, with a new colour monitor that allows operators to control auxiliary flow and to monitor service periods. It also provides all vital machine function information and access to a password lock-out anti-theft system.

The DX62R-3 is powered by a Stage IIIA engine, delivering 36.2kW of power. Electronic injection control and an auto idle function result in improved fuel consumption.

With an operating weight of 6,130kg, the DX62R-3 has a digging depth of 3,815mm and a reach at ground level of 6,100mm.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 49405 0 oLinkExternal www.DoosanEquipment.eu www.DoosanEquipment.eu false /EasySiteWeb/GatewayLink.aspx?alId=49405 false false%>

For more information on companies in this article

Related Content

  • Cat’s upgraded backhoes
    January 6, 2017
    The new Cat 434F backhoe loader is solely mechanically controlled, while its fellow new backhoe model, the Cat 444F, is equipped with pilot joystick controls and can be fitted with either a 4.27m or a 4.87m backhoe. The upgraded machines are part of Caterpillar’s development of its equal sized tyre (EST) machine range in line with the rest of the F Series product family.
    Read More
  • Cat’s upgraded backhoes
    January 31, 2013
    The new Cat 434F backhoe loader is solely mechanically controlled, while its fellow new backhoe model, the Cat 444F, is equipped with pilot joystick controls and can be fitted with either a 4.27m or a 4.87m backhoe. The upgraded machines are part of Caterpillar’s development of its equal sized tyre (EST) machine range in line with the rest of the F Series product family.
    Read More
  • Gradall adds to wheeled excavator range
    January 6, 2017
    Gradall has taken the wraps off its largest wheeled excavator, the XL5300 III. The 23tonne machine has a reach of 10.3m and a maximum digging depth of 7.5m. Bucket breakout force is 113kN and the machine has a rated boom force of 111kN. The wheeled machine is capable of working to the front, the rear or over the side, without the need for outriggers or a dozer blade to provide stability. It has hydraulic drive motors powering both axles for full-time four-wheel drive. Both axles have wet disc brakes to pr
    Read More
  • Komatsu adds WA470 to its Dash-7 wheel loader range
    January 6, 2017
    Komatsu has unveiled its 23,590kg operating weight WA470-7 wheel loader, which offers improved efficiency, lower fuel consumption, improved operator comfort and enhanced serviceability. It is powered by a 203kW Stage IIIB/ EPA Tier 4I Komatsu SAA6D125E-6 engine, which is said to lower fuel consumption by 10% to 15% compared with the WA470-6. The engine is fitted with EGR, a hydraulically-actuated variable geometry turbocharger, and an automatically regenerating DPF. As with all Komatsu Stage IIIB machines,
    Read More

Highlighted Content