Doosan brings new range of large wheeled loaders to INTERMAT

Doosan Infracore Construction Equipment will take the covers off five new wheeled loaders at INTERMAT. The DL300-3, DL350-3, DL420-3, DL450-3 and DL550-3 large wheel loaders – with bucket capacities from 3.0 to 5.5cubic metres - get Scania SCR diesel engines that meet stage IIIB emissions regulations.
January 6, 2017 Read time: 1 min
Doosan's DL420-3 Large wheeled loader live at INTERMAT
695 Doosan Infracore Construction Equipment will take the covers off five new wheeled loaders at INTERMAT.

The DL300-3, DL350-3, DL420-3, DL450-3 and DL550-3 large wheel loaders – with bucket capacities from 3.0 to 5.5cubic metres - get 759 Scania SCR diesel engines that meet stage IIIB emissions regulations.

The DL300-3 and DL350-3 wheel loaders will use Scania’s nine litre DC09 five-cylinder engine giving a maximum rating of 202kW at 1,800rpm. The larger three models will get Scania’s 13-litre DC13 six-cylinder diesel engine. Maximum power outputs are 264, 264 and 283kW respectively, all at a leisurely 1,800rpm.

All models get a new five-speed ZF transmission with closer ratios, which prevent a high variation in engine speed with every gear change.

Models also get a torque-converter-cut-off (TCCO) system, which provides a direct mechanical connection between the engine and transmission.
This torque converter lock-up works from gears 2-5, and has the potential to deliver increased traction with lower fuel consumption.

%$Linker: External 0 0 0 oLinkExternal www.doosanequipment.eu Doosan false http://www.doosanequipment.eu/ false false%>

Hall: 6 Stand: G079

%$Linker: 2 Internal 2 4824 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/intermat-2012/video/ true false%>

For more information on companies in this article

Related Content

  • Kobelco’s new crawler cranes make European debut at INTERMAT
    January 6, 2017
    Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively. Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduce
    Read More
  • Kobelco’s new crawler cranes make European debut at INTERMAT
    April 20, 2012
    Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively. Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduce
    Read More
  • Torque measurement device ensures firm foundations
    January 6, 2017
    Auger Torque has introduced a torque measuring device which fits between its auger drivers and the dipper end and measures the torque applied to screw anchors. A Bluetooth readout shows the torque applied enabling contractors top confirm they have achieved the minimum depth and torque requirements set by the civil engineer.
    Read More
  • Torque measurement device ensures firm foundations
    April 18, 2012
    Auger Torque has introduced a torque measuring device which fits between its auger drivers and the dipper end and measures the torque applied to screw anchors. A Bluetooth readout shows the torque applied enabling contractors top confirm they have achieved the minimum depth and torque requirements set by the civil engineer.
    Read More

Highlighted Content