Skip to main content

Doosan brings new range of large wheeled loaders to INTERMAT

Doosan Infracore Construction Equipment will take the covers off five new wheeled loaders at INTERMAT. The DL300-3, DL350-3, DL420-3, DL450-3 and DL550-3 large wheel loaders – with bucket capacities from 3.0 to 5.5cubic metres - get Scania SCR diesel engines that meet stage IIIB emissions regulations.
January 6, 2017 Read time: 1 min
Doosan's DL420-3 Large wheeled loader live at INTERMAT
695 Doosan Infracore Construction Equipment will take the covers off five new wheeled loaders at INTERMAT.

The DL300-3, DL350-3, DL420-3, DL450-3 and DL550-3 large wheel loaders – with bucket capacities from 3.0 to 5.5cubic metres - get 759 Scania SCR diesel engines that meet stage IIIB emissions regulations.

The DL300-3 and DL350-3 wheel loaders will use Scania’s nine litre DC09 five-cylinder engine giving a maximum rating of 202kW at 1,800rpm. The larger three models will get Scania’s 13-litre DC13 six-cylinder diesel engine. Maximum power outputs are 264, 264 and 283kW respectively, all at a leisurely 1,800rpm.

All models get a new five-speed ZF transmission with closer ratios, which prevent a high variation in engine speed with every gear change.

Models also get a torque-converter-cut-off (TCCO) system, which provides a direct mechanical connection between the engine and transmission.
This torque converter lock-up works from gears 2-5, and has the potential to deliver increased traction with lower fuel consumption.

%$Linker: External 0 0 0 oLinkExternal www.doosanequipment.eu Doosan false http://www.doosanequipment.eu/ false false%>

Hall: 6 Stand: G079

%$Linker: 2 Internal 2 4824 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/intermat-2012/video/ true false%>

For more information on companies in this article

Related Content

  • Hamm launches H series compactors at INTERMAT
    April 4, 2012
    Hamm is launching a range of compaction equipment at INTERMAT. The company is offering its latest HD+ series of tandem rollers. There are 12 models in the new HD+ series from 9-15 tonnes. The range includes vibration, oscillation and combination rollers as well as models with split drums.
  • Cat adds more K-series wheeled loaders at INTERMAT
    January 6, 2017
    Cat has added three new models of wheeled loader to its range, badged 924K, 930K and 938K. All share the same basic architecture, differing in wheelbase, axles, machine width and bucket capacities – the latter extend from 1.9-5.0 cubic metres. The biggest change over the H-series models they replace is an all-new cab, offering a massive improvement in ergonomics and comfort. A wider, deeper front windscreen, climate control, seat-mounted joysticks and an ultra-low in-cab noise level of 66dB(a) are among i
  • Cat adds more K-series wheeled loaders at INTERMAT
    April 20, 2012
    Cat has added three new models of wheeled loader to its range, badged 924K, 930K and 938K. All share the same basic architecture, differing in wheelbase, axles, machine width and bucket capacities – the latter extend from 1.9-5.0 cubic metres. The biggest change over the H-series models they replace is an all-new cab, offering a massive improvement in ergonomics and comfort. A wider, deeper front windscreen, climate control, seat-mounted joysticks and an ultra-low in-cab noise level of 66dB(a) are among i
  • ZF chooses radial motor technology for its hydrostatic transmission
    January 6, 2017
    ZF has chosen a pair of radial hydraulic motors for use in its compact single-speed hydrostatic transmission, the 2HC85, which has been developed for compact wheeled loaders up to 100kW and 10.5tonnes operating weight. For high-torque start-up, the transmission sends oil to both motors and demands maximum stroke to travel from 0-16kph, before isolating one motor and then using 100% oil flow through the remaining motor to propel the machine to its maximum travel speed of 42kph. ZF said radial motors afford a