Skip to main content

Deutz develops low emission diesel range

The new Tier 4 Final/Stage IV emission certified engine range from Deutz is being introduced. This complete line-up of diesels meets the coming noise and exhaust emission requirements in Europe and the US and offers capacities from 2.9-16litres. The low emissions performance is achieved using the Deutz DVERT technology, a package of technical solutions that is used in modular form with varying options used to ensure each engine capacity meets the requirements. Compact design and high torque output are claim
February 6, 2013 Read time: 2 mins
Deutz is now offering a range of new low emission diesels
The new Tier 4 Final/Stage IV emission certified engine range from 201 Deutz is being introduced. This complete line-up of diesels meets the coming noise and exhaust emission requirements in Europe and the US and offers capacities from 2.9-16litres. The low emissions performance is achieved using the Deutz DVERT technology, a package of technical solutions that is used in modular form with varying options used to ensure each engine capacity meets the requirements. Compact design and high torque output are claimed across the range and Deutz says that the engines offer higher power density than previous generation units, allowing these diesels to take the place of larger capacity motors available earlier. This design allows space in an engine compartment for hydraulics as well as the exhaust filtration and after-treatment systems. The range starts with the compact 2.9litre TCD2.9L4 engine, a four cylinder unit available in both turbocharged and naturally aspirated versions and which offers power outputs from 30-55kW while being designed to fit into tight installations. The TCD3.6L4 and TCD4.1L4 are also four cylinder units with power outputs from 56-97kW and 80-115kW respectively, while the TCD6.1L6 and TCD7.8L6 are six cylinder engines available in ratings from 100-180kW and 160-250kW respectively. The TCD12.0V6 has power ratings from 240-390kW and has a V6 configuration, while its larger size means it features emission systems from the DVERT range including selective catalytic reduction (SCR), as well as cooled external exhaust gas regeneration (EGR) and a particulate filter. The V8 configuration, 16litre engine is due shortly and will offer power ratings up to 520kW, as well as using similar emissions systems to the V6 diesel. All the engines are said to benefit from low fuel consumption, helping to reduce running costs for the owner and offsetting the additional cost of the emissions package.

Stand: A4.321/416

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.Deutz.com www.Deutz.com false http://www.deutz.com/ false false%>

%$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 11560 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/bauma-2013/video/ true false%>

For more information on companies in this article

Related Content

  • Putzmeister’s new self-propelled pump can be quicker than a truck mount
    April 19, 2012
    Putzmeister’s new BSC 1409 D self-propelled concrete pump is designed for concreting drilled piles on unfinished surfaces and can deliver up to 85m3/hr at a pressure of up to 71bar. Powered by a 6-cylinder Deutz engine producing 129kW, the BSC 1409 D can travel at a maximum speed of 3.6km and does not need supports to be set up each time it moves.
  • Dana Rexroth will launch the high-efficiency R2 hydromechanical variable transmission for smaller machines
    January 6, 2017
    Dana Rexroth Transmission Systems, the joint venture Dana and Bosch Rexroth, is to launch the R2 hydromechanical variable transmission (HVT). The modular transmission uses both a hydrostatic drive and a mechanical gearbox to deliver fuel savings of up to 25% compared to a torque converter transmission. Designed to work with engine outputs of 134-193kW (180-260hp), the R2 is suitable for use in wheeled loaders, motor graders, lift trucks and a variety of off-highway applications. The hydrostatic drive unit
  • Dana Rexroth will launch the high-efficiency R2 hydromechanical variable transmission for smaller machines
    February 7, 2013
    Dana Rexroth Transmission Systems, the joint venture Dana and Bosch Rexroth, is to launch the R2 hydromechanical variable transmission (HVT). The modular transmission uses both a hydrostatic drive and a mechanical gearbox to deliver fuel savings of up to 25% compared to a torque converter transmission. Designed to work with engine outputs of 134-193kW (180-260hp), the R2 is suitable for use in wheeled loaders, motor graders, lift trucks and a variety of off-highway applications. The hydrostatic drive unit
  • INTERMAT launch for Komatsu wheeled loaders
    April 19, 2012
    Komatsu used INTERMAT to take the wraps off two new Dash 7 wheeled loaders, badged WA380-7 and WA500-7. With engine emissions being the main driver, the smaller 18-tonne WA380-7 packs 142kW from its EU Stage IIIb engine to deliver improved efficiency and lower fuel consumption. The machine also gets torque converter lock-up with the function operating in 2nd, 3rd and 4th gears, and gives the loader a 40 km/h forward speed.