Dana shows HVT R3 at INTERMAT

Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
January 6, 2017 Read time: 1 min
The R3 is the first of a new range of hydro-mechanical variable transmissions from Dana
RSS2254 Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and 2253 Bosch Rexroth AG.

The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%.

Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.

www.dana.com

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Model&Co revealed new grouter at INTERMAT
    January 6, 2017
    Model&Co, a Spanish manufacturer of foundation engineering equipment, used INTERMAT to launch a fully automatic concrete grout mixer. ith advanced electronics, the new mixer uses a touch-screen control panel for the input of concrete powder ratio and water volumes. It can deliver up to 170litres/min of hydrogenised grout at working pressures of up to 115bar. The mixer drum can also be rotated 95° from its vertical position, to simplify washing out.
    Read More
  • Model&Co revealed new grouter at INTERMAT
    April 19, 2012
    Model&Co, a Spanish manufacturer of foundation engineering equipment, used INTERMAT to launch a fully automatic concrete grout mixer. ith advanced electronics, the new mixer uses a touch-screen control panel for the input of concrete powder ratio and water volumes. It can deliver up to 170litres/min of hydrogenised grout at working pressures of up to 115bar. The mixer drum can also be rotated 95° from its vertical position, to simplify washing out.
    Read More
  • ENH shows bitumen emulsion plant technology at INTERMAT
    April 20, 2012
    ENH may operate in 60 countries but its bitumen emulsion plants are relatively new to the French market. But interest from French contractors at the show is proving high, said managing director Erik Haugaard. Mobile ENH equipment is typically used for producing a mix for road repairs. Basing the ENH mill near to where repairs are taking place enables the patching equipment to return at regular intervals for a new supply of material.
    Read More
  • ENH shows bitumen emulsion plant technology at INTERMAT
    January 6, 2017
    ENH may operate in 60 countries but its bitumen emulsion plants are relatively new to the French market. But interest from French contractors at the show is proving high, said managing director Erik Haugaard. Mobile ENH equipment is typically used for producing a mix for road repairs. Basing the ENH mill near to where repairs are taking place enables the patching equipment to return at regular intervals for a new supply of material.
    Read More

Highlighted Content