Dana shows HVT R3 at INTERMAT

Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
January 6, 2017 Read time: 1 min
The R3 is the first of a new range of hydro-mechanical variable transmissions from Dana
RSS2254 Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and 2253 Bosch Rexroth AG.

The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%.

Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.

www.dana.com

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • New configuration Renault Premium Lander on show at INTERMAT
    April 20, 2012
    Renault Trucks’ Tridem 8x4*4 is designed for carrying heavy loads in restricted spaces and is also suitable for mounting mobile cranes or vacuum units. Based on a lightweight Lander 6x4 chassis, the Tridem has an additional 10tonne rated rear steering tag axle giving it a turning circle some 10 to 15% tighter than a traditional 8x4 (depending on the wheelbase). Once back on the road the driver can, depending on the load being carried, raise the rear axle to increase fuel economy.
    Read More
  • New configuration Renault Premium Lander on show at INTERMAT
    April 20, 2012
    Renault Trucks’ Tridem 8x4*4 is designed for carrying heavy loads in restricted spaces and is also suitable for mounting mobile cranes or vacuum units. Based on a lightweight Lander 6x4 chassis, the Tridem has an additional 10tonne rated rear steering tag axle giving it a turning circle some 10 to 15% tighter than a traditional 8x4 (depending on the wheelbase). Once back on the road the driver can, depending on the load being carried, raise the rear axle to increase fuel economy.
    Read More
  • Hatz Diesel goes quieter with its 1D81 Hydro concept
    January 6, 2017
    Hatz’s Diesel’s 1D81 Hydro concept has been developed to offer a low noise level solution for applications using single-cylinder diesel engines. Still at prototype stage, the 667cc and 772cc capacity single-cylinder engine is a new variant of an existing Hatz engine design. As such, it uses common components from the Hatz range, but it differs with an all-new cylinder block and cylinder head design that includes a water jacket, allowing liquid cooling to be introduced.
    Read More
  • Hatz Diesel goes quieter with its 1D81 Hydro concept
    April 16, 2013
    Hatz’s Diesel’s 1D81 Hydro concept has been developed to offer a low noise level solution for applications using single-cylinder diesel engines. Still at prototype stage, the 667cc and 772cc capacity single-cylinder engine is a new variant of an existing Hatz engine design. As such, it uses common components from the Hatz range, but it differs with an all-new cylinder block and cylinder head design that includes a water jacket, allowing liquid cooling to be introduced.
    Read More

Highlighted Content