Dana shows HVT R3 at INTERMAT

Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
January 6, 2017 Read time: 1 min
The R3 is the first of a new range of hydro-mechanical variable transmissions from Dana
RSS2254 Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and 2253 Bosch Rexroth AG.

The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%.

Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.

www.dana.com

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Terex launches fully hydraulic self-erecting tower crane
    April 18, 2012
    Terex Cranes introduced the Eazy 90 fully-hydraulic self-erecting tower crane at INTERMAT. Equipped with a maximum 45m jib, the crane has a telescopic main tower with up to three additional mast sections. Erection can be carried out by two people in 2-4 hours depending on specification. The crane is equipped with safety lock-outs to ensure that each stage of erection has been completed before progressing to the next. A single operator is required to work the crane, with the Eazy 90 offering a maximum li
    Read More
  • Idromeccanica Ramtec shows RT 1600 and RT 590
    January 6, 2017
    Idromeccanica Ramtec brought two models from its expanded hammer range to INTERMAT. Models such as the RT 1600 and RT 590 brought to the show have additional features but also retain proven aspects of the earlier models, which remain available. Changes in the latest models include improved noise levels and compatibility with a larger range of excavators. The latest models also absorb vibrations at the arm of the excavator to a greater degree than in the past.
    Read More
  • Idromeccanica Ramtec shows RT 1600 and RT 590
    April 20, 2012
    Idromeccanica Ramtec brought two models from its expanded hammer range to INTERMAT. Models such as the RT 1600 and RT 590 brought to the show have additional features but also retain proven aspects of the earlier models, which remain available. Changes in the latest models include improved noise levels and compatibility with a larger range of excavators. The latest models also absorb vibrations at the arm of the excavator to a greater degree than in the past.
    Read More
  • Caterpillar’s KO loader
    January 6, 2017
    The new redesigned Cat K Series Small Wheel Loaders—924K, 930K and 938K— being unveiled at Intermat 2012 are said to incorporate new Stage IIIB/Tier 4 Interim emissions standard engines and many new performance enhancing features. An efficient electronically controlled hydrostatic drive system, new optimised Z-bar loader linkage, refined operator's station and a choice of couplers and buckets for best matching the machine to the application are among the notable features on the debuting wheel loader models,
    Read More

Highlighted Content