Dana shows HVT R3 at INTERMAT

Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
January 6, 2017 Read time: 1 min
The R3 is the first of a new range of hydro-mechanical variable transmissions from Dana
RSS2254 Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and 2253 Bosch Rexroth AG.

The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%.

Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.

www.dana.com

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • XGMA show CE-Marked skid steer at INTERMAT
    January 6, 2017
    The latest XG30090 skid steer loader from Xiamen XGMA Machinery (known as XGMA) is powered by a 50.8kW Yanmar 4TNV98 engine and has Bosch Rexroth hydraulics. The CE-marked machine has a rated load of 926kg, its 0.5m3 bucket has 24kN of breakout with 30° of rollback and a maximum dump height of 2375mm. Service access is simplified with a forward tilting cab.
    Read More
  • XGMA show CE-Marked skid steer at INTERMAT
    April 19, 2012
    The latest XG30090 skid steer loader from Xiamen XGMA Machinery (known as XGMA) is powered by a 50.8kW Yanmar 4TNV98 engine and has Bosch Rexroth hydraulics. The CE-marked machine has a rated load of 926kg, its 0.5m3 bucket has 24kN of breakout with 30° of rollback and a maximum dump height of 2375mm. Service access is simplified with a forward tilting cab.
    Read More
  • Dana HVT ready for Stage V engines
    April 23, 2018
    Dana Rexroth transmission systems says it is working with engine manufacturers in the off-highway industry to support European stage V engine emissions regulations. Its hydromechanical variable transmission (HVT) platform is already prepared for stage V emissions standards, and the firm is collaborating with leading engine manufacturers to develop transmission control software that will allow it to deliver a fully compliant solution.
    Read More
  • Dana and Bosch agree on technology partnership
    February 9, 2012
    Dana Holding Corporation and Bosch Rexroth are planning to establish a joint venture partnership operation to co-develop and manufacture advanced drive transmissions for the off-highway, construction equipment market.
    Read More

Highlighted Content