Dana shows HVT R3 at INTERMAT

Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
January 6, 2017 Read time: 1 min
The R3 is the first of a new range of hydro-mechanical variable transmissions from Dana
RSS2254 Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and 2253 Bosch Rexroth AG.

The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%.

Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.

www.dana.com

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Diesel/electric drive for compact Terex excavator
    January 6, 2017
    Terex has introduced the production version of its Twin Drive TC16 mini excavator. Equipped with both a 13kW diesel engine and an 11kW electric motor, the 1.9tonne machine can be used in confined spaces with zero exhaust emissions. A 15m cable reel is installed behind the cab, allowing the machine to travel under electric power.
    Read More
  • Diesel/electric drive for compact Terex excavator
    April 16, 2012
    Terex has introduced the production version of its Twin Drive TC16 mini excavator. Equipped with both a 13kW diesel engine and an 11kW electric motor, the 1.9tonne machine can be used in confined spaces with zero exhaust emissions. A 15m cable reel is installed behind the cab, allowing the machine to travel under electric power.
    Read More
  • Leading Edge loader new at show
    January 6, 2017
    The latest addition to the Edge Design range of mobile handling equipment has been released at INTERMAT. The static (SL) / mobile (ML) / tracked (TL) vessel loader is capable of transferring up to 1,200tonnes per hour of material, and can accept it direct from large dumping trucks or tipping trailers. The Edge-Loader TL220 features a conventional belt design and large wide track mounted receiving hopper to facilitate loader filling. It can also be supplied with a discharge conveyor with full 180-degree radi
    Read More
  • Leading Edge loader new at show
    April 19, 2012
    The latest addition to the Edge Design range of mobile handling equipment has been released at INTERMAT. The static (SL) / mobile (ML) / tracked (TL) vessel loader is capable of transferring up to 1,200tonnes per hour of material, and can accept it direct from large dumping trucks or tipping trailers. The Edge-Loader TL220 features a conventional belt design and large wide track mounted receiving hopper to facilitate loader filling. It can also be supplied with a discharge conveyor with full 180-degree radi
    Read More

Highlighted Content