Cummins moves closer to Stage IV emissions at INTERMAT

Cummins is using INTERMAT to display a full line-up of engines in the 56-506kW sector with next generation exhaust after treatment systems that meet EU Stage IV and EPA Tier 4 Final emissions regulations.
January 6, 2017 Read time: 1 min

196 Cummins is using INTERMAT to display a full line-up of engines in the 56-506kW sector with next generation exhaust after treatment systems that meet EU Stage IV and EPA Tier 4 Final emissions regulations.

Cummins QSB6.7 mid-range achieves an impressive 231kW peak power at 2,200rpm, with ratings available down to 109kW. The QSB6.7 uses the Cummins Compact Catalyst-Selective Catalytic Reduction (CCC-SCR) after treatment system to meet the forthcoming requirements.

Heavy-duty power will be highlighted by the QSX15 rated up to 503kW at 2,100 rpm with a peak torque of almost 2800Nm. The QSX15’s after treatment system combines the Cummins Particulate Filter with Selective Catalytic Reduction (CPF-SCR).

“Cummins will be ready to meet the near-zero level of emission regulations with the most productive engine range we have ever had available for our construction equipment customers,” said Bryden Clewlow, director of Cummins off-highway sales Europe.

“Our in-house technology expertise also extends to high-pressure common rail fuel systems, filtration systems, electronic controls and variable geometry turbocharging to fully optimise engine performance.”

%$Linker: External 0 0 0 oLinkExternal www.cumminsengines.com Cummins false http://www.cumminsengines.com/ false false%>

Hall: 5B Stand: M027

For more information on companies in this article

Related Content

  • A fresh breath of air
    July 16, 2012
    With a new wave of exhaust emission regulations coming shortly, engine manufacturers are well on track to develop new solutions as Mike Woof reports A wave of technological advances has made the current generation of diesels the cleanest industrial engines ever produced. Driven by tightening controls on emissions, manufacturers have had to develop an array of innovative solutions that will help cut particulate and NOx being emitted from the tailpipe. When the phased reduction in exhaust emissions was first
    Read More
  • Volvo updates FMX construction trucks
    April 16, 2013
    Volvo Trucks has updated its FMX construction tipper range, first launched in 2010. The latest FMX adopts the Euro 6 engine line-up introduced earlier this year in the firm’s on-highway FM and FH trucks, with D11 offerings at 246-335kW and D13 engines delivering 313-402kW. These engines are equipped with non-cooled exhaust gas recirculation (EGR) and a diesel particulate filter (DPF). The FMX range is available with Volvo Dynamic Steering (VDS), which uses an electric motor to assist the hydraulic power ste
    Read More
  • Cat adds more K-series wheeled loaders at INTERMAT
    January 6, 2017
    Cat has added three new models of wheeled loader to its range, badged 924K, 930K and 938K. All share the same basic architecture, differing in wheelbase, axles, machine width and bucket capacities – the latter extend from 1.9-5.0 cubic metres. The biggest change over the H-series models they replace is an all-new cab, offering a massive improvement in ergonomics and comfort. A wider, deeper front windscreen, climate control, seat-mounted joysticks and an ultra-low in-cab noise level of 66dB(a) are among i
    Read More
  • Cat adds more K-series wheeled loaders at INTERMAT
    April 20, 2012
    Cat has added three new models of wheeled loader to its range, badged 924K, 930K and 938K. All share the same basic architecture, differing in wheelbase, axles, machine width and bucket capacities – the latter extend from 1.9-5.0 cubic metres. The biggest change over the H-series models they replace is an all-new cab, offering a massive improvement in ergonomics and comfort. A wider, deeper front windscreen, climate control, seat-mounted joysticks and an ultra-low in-cab noise level of 66dB(a) are among i
    Read More

Highlighted Content