Cummins moves closer to Stage IV emissions at INTERMAT

Cummins is using INTERMAT to display a full line-up of engines in the 56-506kW sector with next generation exhaust after treatment systems that meet EU Stage IV and EPA Tier 4 Final emissions regulations.
January 6, 2017 Read time: 1 min

196 Cummins is using INTERMAT to display a full line-up of engines in the 56-506kW sector with next generation exhaust after treatment systems that meet EU Stage IV and EPA Tier 4 Final emissions regulations.

Cummins QSB6.7 mid-range achieves an impressive 231kW peak power at 2,200rpm, with ratings available down to 109kW. The QSB6.7 uses the Cummins Compact Catalyst-Selective Catalytic Reduction (CCC-SCR) after treatment system to meet the forthcoming requirements.

Heavy-duty power will be highlighted by the QSX15 rated up to 503kW at 2,100 rpm with a peak torque of almost 2800Nm. The QSX15’s after treatment system combines the Cummins Particulate Filter with Selective Catalytic Reduction (CPF-SCR).

“Cummins will be ready to meet the near-zero level of emission regulations with the most productive engine range we have ever had available for our construction equipment customers,” said Bryden Clewlow, director of Cummins off-highway sales Europe.

“Our in-house technology expertise also extends to high-pressure common rail fuel systems, filtration systems, electronic controls and variable geometry turbocharging to fully optimise engine performance.”

%$Linker: External 0 0 0 oLinkExternal www.cumminsengines.com Cummins false http://www.cumminsengines.com/ false false%>

Hall: 5B Stand: M027

For more information on companies in this article

Related Content

  • Ricardo shows KERS for diggers at bauma 2013
    April 19, 2013
    Engineering firm Ricardo is part way through a research programme to develop an advanced energy recovery system that can be integrated into an excavator’s hydraulic system. Known as the High Efficiency Excavator (HFX) project, the system uses a 5kg carbon fibre flywheel that is encased in a vacuum-sealed cartridge, which contributes to minimising friction. The flywheel is spun at speeds of up to 30,000rpm using a magnetic coupling, which is driven from a hydraulic motor. Power for the hydraulic motor comes
    Read More
  • Torque measurement device ensures firm foundations
    January 6, 2017
    Auger Torque has introduced a torque measuring device which fits between its auger drivers and the dipper end and measures the torque applied to screw anchors. A Bluetooth readout shows the torque applied enabling contractors top confirm they have achieved the minimum depth and torque requirements set by the civil engineer.
    Read More
  • Torque measurement device ensures firm foundations
    April 18, 2012
    Auger Torque has introduced a torque measuring device which fits between its auger drivers and the dipper end and measures the torque applied to screw anchors. A Bluetooth readout shows the torque applied enabling contractors top confirm they have achieved the minimum depth and torque requirements set by the civil engineer.
    Read More
  • Bell is introducing its new B25E and B30E ADTs
    January 6, 2017
    Bell Equipment is now launching the new B25E and B30E ADTs to its range, seen first in prototype form at the Intermat show in Paris in 2012. Marc Schürmann managing director of Bell Equipment Europe said, “There are several improvements over the D series. The A frame design from the larger trucks is now being used in the smaller trucks. There is more suspension travel and this gives more comfort and allows higher travel speeds.” He added that the increased travel speed is of particular benefit when the truc
    Read More

Highlighted Content