Skip to main content

Cross Fraser Partnership wins BC tunnel work

The partnership for the tunnel work near Vancouver in Canada consists of Pomerleau BC, Bouygues Construction Canada and Fomento de Construcciones y Contratas Canada (FCC) and is supported by design and engineering consultant Arcadis.
By David Arminas September 27, 2024 Read time: 2 mins
The new tunnel will be built parallel to and just upstream from the existing 629m-long four-lane Massey Tunnel that was opened in 1959 (conceptual drawing courtesy of BC Government)

Cross Fraser Partnership has been awarded the Design Early Works Agreement (DEWA) for the Fraser River Tunnel Project by the Canadian province of British Columbia.

This agreement signals the start of the development phase, which allows for a transparent and collaborative approach to tunnel design, project schedule, costs and risks associated with the project close to the city of Vancouver.

The new tunnel will be built parallel to and just upstream from the existing 629m-long four-lane Massey Tunnel that was opened in 1959. It was the first project in North America to use immersed tube technology and remains Canada’s only tunnel below sea level and now carries more than its design limit of 80,000 vehicles a day. Extensive renovations to the tunnel and attempts to improve access roads have been done over the years, but the structure has only about 10 years of useful life, according to some reports.

Cross Fraser Partnership is an equal-parts consortium of major Canadian and international construction and engineering firms with a track record in delivering complex infrastructure projects.

The partnership consists of Pomerleau BC, Bouygues Construction Canada and Fomento de Construcciones y Contratas Canada (FCC) and supported by design and engineering consultant Arcadis.

The proposed eight-lane immersed tube tunnel will incorporate advanced engineering solutions and sustainable construction practices, reflecting what the consortium says is its commitment to innovation and environmental stewardship.

The Fraser River Tunnel Project is a key component of the broader Highway 99 Tunnel Programme and the province's broader transportation strategy. The project will improve travel times and reliability, increase connections across the South Arm of the Fraser River near the mouth of the river and support economic growth in the lower mainland region.

The new crossing will be an eight-lane immersed tube tunnel with three general-purpose lanes and a dedicated transit lane in each direction. It will also feature a separate multi-use path to support pedestrians, cyclists and other active transportation options.

The project includes replacing the existing Deas Slough Bridge and the Highway 99 upgrades between Westminster Highway in the city of Richmond and the Ladner Trunk Road in the city of Delta.

An earlier replacement proposal – a 3km-long 10-lane cable-stayed bridge costing US$2.8 billion - was underway in 2015. However, a provincial election in 2017 saw a change of government which promptly scrapped the project in favour of more research and consultation with the mayors of the greater Vancouver area cities and municipalities. In October 2019 the mayors recommended an eight-lane tunnel as the replacement.

Related Content

  • Carmacks wins Grande Prairie upgrade
    June 8, 2021
    Work will start soon to widen Highway 40 in and around the northern city of Grande Prairie in Canada's Alberta province.
  • Cable works starts on Gordie Howe Bridge
    February 10, 2023
    The tolled six-lane bridge over the Detroit River, between Windsor in Canada and Detroit in the US, is costing around US$4.2 billion with an opening date likely in 2025.
  • Manitowoc MLC650 cranes keep Champlain Bridge on track
    October 28, 2016
    Two Manitowoc MLC650s are working on a project to replace the Champlain Bridge that spans the Saint Lawrence River in Montreal, Canada. The engineering consortium - Signature on the Saint Lawrence Construction (SSLC) – is assigned to the task. The capacity and reduced ground preparation made possible by the MLC650’s VPC-MAX attachment – as well as the ease of use of its Crane Control System (CCS) – are helping the team stay on schedule. The Champlain Bridge connects one of North America’s busiest road
  • Diefenbaker Bridge saved from tolling
    February 11, 2020
    Canada's Prince Albert city will not toll the ageing two-lane Diefenbaker Bridge