ContiTech Conveyor Belt Group showcases MegaPipes solution

The ContiTech Conveyor Belt Group’s “innovative and environmentally friendly” conveyor belt solutions include the new MegaPipes. With an external diameter of up to 900mm, ContiTech claims the product doubles the capacities compared to conventional closed-trough belts and enables the transport of crushed ore downstream of the primary crusher or of bulky goods in the industrial sector applications.
January 6, 2017 Read time: 1 min
The new ContiTech Mega Pipes has an external diameter of 750-900mm
The 1527 ContiTech Conveyor Belt Group’s “innovative and environmentally friendly” conveyor belt solutions include the new MegaPipes.

With an external diameter of up to 900mm, ContiTech claims the product doubles the capacities compared to conventional closed-trough belts and enables the transport of crushed ore downstream of the primary crusher or of bulky goods in the industrial sector applications.

“Their special design allows the angle of inclination of the closed-trough belt systems to be increased by up to 45°, depending on the bulk material properties,” says ContiTech.

Another highlight is conveyor belts specially developed to transport hot goods, even at extremely high material temperatures. Through the use of an innovative insulation layer in the belt construction, heat transmission is lowered by up to 40°C, while the total weight of the conveyor belts is significantly reduced. The business unit is also presenting the low-stretch EPP textile belts CON-MONTEX and CON-BITEX as well as the TransCord conveyor belts.

Stand: B2.301/402

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.ContiTech.de www.Contitech.de false http://www.contitech.de/ false false%>

For more information on companies in this article

Related Content

  • LTM1750-9.1 all-terrain crane joins Liebherr line-up
    February 7, 2013
    Liebherr has developed the LTM1750-9.1, a nine-axle all-terrain crane with a maximum lift capacity of 750 tonnes. The 52m telescopic boom machine is carried by the machine and offers a 154m maximum lift height, with a maximum working radius of 112m. A luffing fly jib can be added in 3.5m increments to take maximum lift height to 91m. Weighing in at 108 tonnes in transport configuration, the LTM puts down 12 tonnes per axle. However if the machine’s boom supports are removed the crane can travel at 11 tonnes
    Read More
  • Power meets control with Case’s new dozers
    January 6, 2017
    Case says its three new M Series dozers being introduced at bauma – the 1150M, 1650M and 2050M – offer a 10.5% fuel saving, and 19% increase in productivity, compared to the previous generation of machines, due to their claimed best-in-class engine reaction. With operating weights from 13-20tonnes and like other M Series models, the three new dozers are powered by fuel-efficient, Tier 4 Interim FPT engines, using a proven Selective Catalytic Reduction (SCR) technology. The 1150M and 2050M with their new SCR
    Read More
  • Power meets control with Case’s new dozers
    February 7, 2013
    Case says its three new M Series dozers being introduced at bauma – the 1150M, 1650M and 2050M – offer a 10.5% fuel saving, and 19% increase in productivity, compared to the previous generation of machines, due to their claimed best-in-class engine reaction. With operating weights from 13-20tonnes and like other M Series models, the three new dozers are powered by fuel-efficient, Tier 4 Interim FPT engines, using a proven Selective Catalytic Reduction (SCR) technology. The 1150M and 2050M with their new SCR
    Read More
  • Sandvik DC125R is new member of DC hammer drill family
    February 13, 2013
    Sandvik DC125R is a new member to the proven Sandvik DC family of compact, rubber-tyred top hammer drill rigs. The fully remote-controlled, hydraulic and self-propelled mini-sized drilling unit on a four-wheel drive carrier, is for drilling 22–45mm holes, and replaces the former Sandvik DC122R, one in the series of rigs originally launched in 1988 under the product name of Tamrock Commando. “A range of job site tests show that the new model offers better manoeuvrability than ever before. This is thanks to t
    Read More

Highlighted Content