Skip to main content

Commuters switching from cars to motorcycles will cut congestion

A study carried out by research company Transport and Mobility in Belgian capital Brussels shows that if more drivers switch from cars to motorcycles, congestion will be reduced significantly. The study investigated the effects of increasing the percentage of motorcycles to traffic flow using a stretch of road used by commuters driving into Brussels, which is one of Europe’s most congested cities. The research team evaluated traffic flow as well as air quality. Using sensors placed along the route, and meas
June 20, 2014 Read time: 2 mins
A study carried out by research company Transport and Mobility in Belgian capital Brussels shows that if more drivers switch from cars to motorcycles, congestion will be reduced significantly. The study investigated the effects of increasing the percentage of motorcycles to traffic flow using a stretch of road used by commuters driving into Brussels, which is one of Europe’s most congested cities. The research team evaluated traffic flow as well as air quality. Using sensors placed along the route, and measuring traffic flow every 5 minutes, the team mapped out a typical peak period pattern for vehicle movements. This was then used as the benchmark for the study. Using software and data from the Federal Planning Bureau the research team analysed the recovered information, which was then used to simulate traffic flow. The simulation was also compared to measured flow data to evaluate its accuracy. The results were close and proved that the computer model was accurate.

The team then began to adjust the percentages of different types of vehicle during rush hour. A shift from car to motorcycle of just 10% resulted in a dramatic reduction of traffic queues and a quicker return to normal driving conditions. In terms of actual figures what this means is that if just 10% of drivers switched to two wheels, an overall reduction in travel time of 63% would be achieved. Moreover, the team found that if 25% of commuters switched to two wheels then congestion would be eliminated altogether.

The team also looked at emissions and found that as well as the fact that total external emission costs of motorcycles (all pollutants combined) is 21% lower than that of an average car, when 10% of the traffic is made up of bikes a 6% reduction of emissions overall is achieved, with 5% of this due simply to smoother traffic flow and higher average speeds.

Related Content

  • All change: get ready to rethink everything
    November 10, 2022
    How can we make our infrastructure ready for new sustainability challenges? What kind of investments are needed? And who will finance them? Tolling association Asecap has some thoughts. Geoff Hadwick reports from Lisbon
  • NDT sensor fusion in structural pavement condition surveys
    February 27, 2017
    Early detection of pavement defects and the causes of deterioration is essential for effective maintenance planning, writes Dr Alena Uus* There is a need for optimisation and development of UK highway survey methods that would provide comprehensive information on the surface and subsurface pavement condition and operate at traffic speed, which eliminates the requirement for lane closures. Performance of non-destructive testing (NDT) methods commonly employed in pavement condition surveys can be potent
  • Safety technology to cut crashes
    January 22, 2020
    Bloomberg Philanthropies has commissioned a new road safety report that shows 42,000 lives could be saved and 150,000 serious injuries prevented by 2030.
  • Latest innovations in GPS and machine control
    February 22, 2012
    Modern satellite technology is making life easier for everyone on the construction site and in the office. Most major equipment manufacturers are now integrating GPS machine control systems into the design of excavators, bulldozers, pavers, and motor graders. For stake-less work it is a major component for automatic grading, surveying, and excavating systems, with contractors and construction companies using GPS machine control systems to improve operations.