Skip to main content

Combined traffic management and physical measures reduce noise

New research in Spain that explored solutions to reducing traffic noise suggests that the best option is to combine global measures, such as speed restrictions, and local measures, such as noise screens.
May 3, 2012 Read time: 3 mins
New research in Spain that explored solutions to reducing traffic noise suggests that the best option is to combine global measures, such as speed restrictions, and local measures, such as noise screens.

In 2000, it was estimated that more than 44 per cent of European citizens (or about 210 million people) were exposed to road traffic noise levels that exceeded 55 decibels (dB). Excessive noise can be detrimental to health with effects on sleep, mental health and physical performance. The study is based on a noise-mapping project for the entire city of Palma de Mallorca. The noise maps were created with a model (CadnaA) that used geographic data on traffic, weather and populations. Using the maps, the study analysed possible noise mitigation solutions.

The noise maps revealed that the highest noise levels were near main roads and the highway. Nearly the whole population is exposed to noise levels of more than 55 dB (weighted day-night noise level LDen) and 50 dB during the night (LNight).

Based on traffic composition, the study divided the city into two parts, the city centre and the highway, and proposed four possible noise mitigation solutions:

  •  A 50% reduction of heavy vehicles (HVs) in the city centre and a speed reduction from 90 to 70 km/hour on the highway.
  • A 50% reduction of all vehicles in the city centre and a speed reduction on the highway to 60 km/hour for HVs and to 70 km/hour for light vehicles.
  • A 75% reduction of HVs and a 50% reduction of light vehicles in the city centre and on the highway, and a speed reduction to 60 km/hour for HVs and to 70 km/hour for light vehicles.
  • The use of local measures, such as tunnels and noise barriers, on the highway.

Using the noise maps and modelling techniques the study compared the impacts of these four scenarios. All solutions were found to reduce the number of people exposed to the highest noise levels. Both global traffic management measures and local physical measures, such as barriers, reduce the number of inhabitants exposed to noise levels above 65 dB, but it is a combination that yields the best results with a 31% reduction in the population exposed to levels exceeding 65 dB.

Scenario 2, which uses traffic management techniques, is the most cost-effective over one year. However, after two years it is the solution that combines global and local measures (Scenario 3) that is the most cost-effective, producing benefits worth €2,821,076 per year with total initial construction costs of €2,221,560. Scenario 3 also offers the highest noise level reduction, with levels reduced by up to 5dB (as opposed to 3-4 dB in Scenario 2).

The study noted that some noise measures can interfere with other objectives, such as road safety, energy consumption and congestion. This must be considered when developing mitigation plans by involving stakeholders from other policy sectors, such as transport planning, road maintenance and air quality.

Related Content

  • LiDAR surveying is making inroads into asset management
    December 18, 2017
    In the coming age of the autonomous vehicle, fast and accurate LiDAR surveying will be increasingly important, explains Valdis Vanags. The game-changing introduction of autonomous vehicles relies not only on intelligent traffic systems but well maintained roads to help computer-guided systems navigate using road markings. Laser scanning technology, too, is a game changer when it comes to planning and executing many civil engineering projects, including transport network upgrades and smart city initiatives.
  • Shell’s John Read explains “adaptable bitumen” developments
    December 15, 2016
    Shell’s highly innovative bitumen and asphalt solutions are helping create future-ready urban road networks around the world to meet the needs of today and tomorrow. Shell’s general manager of bitumen technology, Professor John Read, takes a look at some of the company’s game-changing ideas. The next 30 or so years will see a significant transformation in the way we live. Whereas almost 75% of the world’s population lived in rural locations in 1950, around 75% will live in cities by 2050. The global popu
  • Mega city transport in Mexico
    June 13, 2012
    Rapid urban growth is resulting in massive mega cities with major transport needs and Mexico City is one of the world’s largest – Mike Woof reports Mexico City is a vast, sprawling metropolis and one of the world’s largest cities, resulting in huge problems for its inhabitants, particularly with regard to infrastructure. Measuring population size is an inexact science for large cities as suburban areas can add to the figures considerably, especially in developing nations where unplanned expansion is as comm
  • Made to Measure laser mapping
    June 15, 2012
    Dutch surveying company Geomaat says it is taking millimetre accurate measurements in record time to aid a range of highway design, construction and maintenance projects. Using the mobile laser mapping system StreetMapper, and specially developed point cloud software, Geomaat says it can calculate highly accurate cutting, milling and asphalt figures, create as built models and undertake change detection.