Skip to main content

Combined traffic management and physical measures reduce noise

New research in Spain that explored solutions to reducing traffic noise suggests that the best option is to combine global measures, such as speed restrictions, and local measures, such as noise screens.
May 3, 2012 Read time: 3 mins
New research in Spain that explored solutions to reducing traffic noise suggests that the best option is to combine global measures, such as speed restrictions, and local measures, such as noise screens.

In 2000, it was estimated that more than 44 per cent of European citizens (or about 210 million people) were exposed to road traffic noise levels that exceeded 55 decibels (dB). Excessive noise can be detrimental to health with effects on sleep, mental health and physical performance. The study is based on a noise-mapping project for the entire city of Palma de Mallorca. The noise maps were created with a model (CadnaA) that used geographic data on traffic, weather and populations. Using the maps, the study analysed possible noise mitigation solutions.

The noise maps revealed that the highest noise levels were near main roads and the highway. Nearly the whole population is exposed to noise levels of more than 55 dB (weighted day-night noise level LDen) and 50 dB during the night (LNight).

Based on traffic composition, the study divided the city into two parts, the city centre and the highway, and proposed four possible noise mitigation solutions:

  •  A 50% reduction of heavy vehicles (HVs) in the city centre and a speed reduction from 90 to 70 km/hour on the highway.
  • A 50% reduction of all vehicles in the city centre and a speed reduction on the highway to 60 km/hour for HVs and to 70 km/hour for light vehicles.
  • A 75% reduction of HVs and a 50% reduction of light vehicles in the city centre and on the highway, and a speed reduction to 60 km/hour for HVs and to 70 km/hour for light vehicles.
  • The use of local measures, such as tunnels and noise barriers, on the highway.

Using the noise maps and modelling techniques the study compared the impacts of these four scenarios. All solutions were found to reduce the number of people exposed to the highest noise levels. Both global traffic management measures and local physical measures, such as barriers, reduce the number of inhabitants exposed to noise levels above 65 dB, but it is a combination that yields the best results with a 31% reduction in the population exposed to levels exceeding 65 dB.

Scenario 2, which uses traffic management techniques, is the most cost-effective over one year. However, after two years it is the solution that combines global and local measures (Scenario 3) that is the most cost-effective, producing benefits worth €2,821,076 per year with total initial construction costs of €2,221,560. Scenario 3 also offers the highest noise level reduction, with levels reduced by up to 5dB (as opposed to 3-4 dB in Scenario 2).

The study noted that some noise measures can interfere with other objectives, such as road safety, energy consumption and congestion. This must be considered when developing mitigation plans by involving stakeholders from other policy sectors, such as transport planning, road maintenance and air quality.

Related Content

  • Weigh in motion technology reduces road damage
    February 8, 2012
    Overweight vehicles cause enormous damage to road structures but they can be caught, even at high speed. Weigh-in-motion or WIM devices are designed to capture and record axle weights and gross vehicle weights as vehicles drive over a measurement site.
  • Widening works: road user’s nightmare or operator’s challenge?
    March 14, 2017
    Early - and continuous planning - is essential for successful road widening projects. By Nina Sacagiu, project manager, and Laurent Charles-Nicolas, project director, at Egis. Keeping goods and people moving safely is the primary objective of any transport authority across the world. Delivering this objective on motorways and making the most out of network capacity requires all the resources, skills and ingenuity of those in charge of managing the infrastructure. When the network can no longer cope wit
  • Digital cameras and VMS improve London and Scottish road safety
    March 18, 2016
    London and Scotland are using VMS and digital cameras to successfully lower road deaths. Road safety measures such as variable message signs (VMS) and digital cameras have boosted road safety in the UK capital London and also in the Scottish Highlands. And the systems need not be a drain on electricity supplies. Full matrix driver information signs from SWARCO Traffic, one of the UK’s leading traffic management technology providers, are being installed for the first time across the Transport for London (TfL
  • Eradicating work zone danger
    June 26, 2013
    New safety systems for highway work zones are helping to reduce deaths and injuries in the United States, while much work is being done in Europe to improve work zone safety. Guy Woodford reports. With more road building underway than at any one time in Texas history, the US Lone Star state’s Department of Transportation (TxDOT) is introducing its first highway safety system with queue-warning technology and temporary rumble strips to cut work zone collisions. Debuting along a central Texas stretch of the